Unit Display Panels, Operation, Timer

UNIT DISPLAY PANELS

NOTE: The display panel on the indoor unit will look like one of the following. Some of the functions will appear on the display panel, remote control or both.

On the Unit:

Infrared signal receptor

OPERATION AUTO TIMER

OPERATION:

This indicator flashes once per second after power is on and illuminates when the unit is in operation.

ECON PRE-DEF

A08486

Infrared signal receptor

TIMER OPERATION

PRE-DEF

A07544

12K

AUTO	TIMER PRE.-DEF* OPERATION

A08483

TIMER:

This indicator illuminates when TIMER is set ON or OFF.

PRE.-DEF indicator (heat pump units only):

Pre-Def indicator illuminates when the coil is warming up to prevent cold blow or when unit goes into defrost mode.

AUTO indicator:

When air conditioner is set to AUTO mode, the indicator illuminates.

FAN ONLY indicator:

When air conditioner is set to FAN ONLY mode, this indicator illuminates.

18K - 24K

*PRE-DEF light will illuminate when the unit is running in FAN ONLY mode on Cooling Only units.

Note: Cooling only units have same LED lights but without PRE-DEF print.

NOTE: All the pictures in this manual are for demonstration purposes only. The actual shape of your air conditioner may be slightly different, but the operation instructions are the same.

Remote Control Display

1 2 3

AUTO COOL DRY HEAT FAN

S E T T E MP.

CL OC K

TIMER ON

TIMER OFF

SP EE D	AUTO LOW MED H IGH
	8
	9

A08043

1TRANSMISSION INDICATOR: Illuminates when remote control transmits signals to the indoor unit.

2MODE DISPLAY: Indicates the current operation mode “AUTO”, “COOL”, “DRY”, “HEAT” (heat pumps only), or “FAN”.

3ON/OFF INDICATOR: This symbol appears when the unit is turned on by the remote control, and disappear when the unit is turned off.

4TEMPERATURE DISPLAY: Temperature setting from

62_F (17_C) to 88_F (30_C) will be displayed. If FAN mode is selected, there will be no temperature displayed.

5CLOCK DISPLAY: Indicates the current time (0 to 24 hours).

6TIMER DISPLAY: Indicates the set times for the timer operation (0 to 24 hours).

7LOCK DISPLAY: Displays when settings are locked.

8FAN SPEED DISPLAY: Indicates the set fan speed. AUTO is displayed when unit is running in AUTO or DRY mode.

9SLEEP DISPLAY: Indicates unit is running in SLEEP mode.

NOTE: Symbols shown in this manual are for the purpose of demonstration. During actual operation, only the relevant symbols are displayed.