Pelco TW3008AR-4 manual Installation, Mounting

Page 7

Installation

Make sure all parts are present for the unit.

1Universal power supply (Part #PS07-6602-9012G)

1Power cord (#US-320-C13, #UK-320-C13, #EU-320-C13, or #AU-320-C13)

8 UTP mating connectors

4 Rack mount screws with washers

MOUNTING

The TW3008AR-4 receiver is 1 rack unit high and can be mounted into a standard EIA 19-inch rack, under a desk/table, or onto a wall. The TW3008AR-4 is shipped with the rack ears on the front, but they can be removed and placed on the center or back of the unit. The following mounting options are possible.

•Rack ears on the center of the unit for rack mount, desk/table mount, or wall mount

•Rack ears on the front of the unit for rack mount

•Rack ears on the back of the unit for rack mount

Figure 2. Mounting the TW3008AR-4

C1668M (8/06)

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TW3008AR-4 Active Receiver Page Important Safety Instructions Radio and Television Interference Regulatory NoticesModels DescriptionParts of the Receiver Mounting InstallationFactory Default Dial Position Setting the Distance DialsCable Type ApplicationsShows a TW3008AR-4 connected to a UTP fixed camera TW3008AR-4 Connected to a Single Passive Transceiver TW3008AR-4 Connected to a 4-Channel Passive Transceiver Electrical SpecificationsC1668M 8/06 Product Warranty and Return Information ISO9001
Top Page Image Contents