Panasonic KX-HNS101 manual Example 2 Installed on the right of the window

Page 13

Setup

Example 2: Installed on the right of the window

Correct

1 “” marks point directly at each other and are within 25.4 mm (1 inch).

1 GREEN

{xC}

Incorrect

2 “” marks are not aligned. Magnet unit is too high/too low.

2

RED

{xC}

3 “” marks are aligned but units are too far apart.

3 RED

{xC}

For assistance, please visit www.panasonic.com/support

13

Image 13

Contents Thank you for purchasing a Panasonic product Installation GuideIntroduction Supplied accessories Accessory informationOther information About this system For your safetyFor best performance Important safety instructionsGeneral information Hub location/avoiding noiseEnvironment Other informationRoutine care Important Information Setup overview About the LED indicatorPart names and functions Using registration buttons Inserting the batteryUsing the app Registering the window/door sensorChanging the sensor type Wireless communication rangeIndicator Temporary placementConfirming proper operation Correct Example 1 Installed on the left of the windowIncorrect Example 2 Installed on the right of the window Securing with screws InstallationSensor unit Securing with double-sided tape Removing when secured with double-sided tapeFeatures available when using the Home Network app Testing the window/ door sensorAccessing the User’s Guide Specifications FCC RF Exposure Warning FCC and other informationFCC ID can be found inside the sensor unit For hearing or speech impaired TTY users, TTY Customer servicesOr, contact us via the web at Or, send your request by E-mail toLimited Warranty Coverage Warranty For United States and Puerto RicoWhen you ship the product Limited Warranty Limits And ExclusionsFor your future reference If your product is not working properly