Panasonic KX-HNS101 Securing with double-sided tape, Removing when secured with double-sided tape

Page 16

Setup

Securing with double-sided tape

Note:

RMake sure the surfaces of the sensor unit, magnet unit, and the installation area are clean and dry before applying double-sided tape.

1Check that the sensor unit cover and magnet unit cover are attached.

2Affix double-sided tape to the sensor unit and magnet unit.

R Make sure the tape covers the screw holes on the back of each unit.

5

3Install the sensor unit and magnet unit.

R Press firmly on each unit to ensure solid adhesion to the installation surface.

Important:

R5 Align the “” marks on the sensor unit and the magnet unit so that they point directly at each other and are no more than 25.4 mm (1 inch) apart.

Removing when secured with double-sided tape

1Tie a piece of thread to two sticks, screwdrivers, etc.

2Pull the thread tight and use it to cut the double-sided tape, and then remove any excess tape.

1 Excess tape

1

16For assistance, please visit www.panasonic.com/support

Image 16

Contents Installation Guide Thank you for purchasing a Panasonic productIntroduction Supplied accessories Accessory informationOther information For your safety About this systemImportant safety instructions For best performanceGeneral information Hub location/avoiding noiseEnvironment Other informationRoutine care Important Information Setup overview About the LED indicatorPart names and functions Inserting the battery Using registration buttonsUsing the app Registering the window/door sensorWireless communication range Changing the sensor typeIndicator Temporary placementConfirming proper operation Correct Example 1 Installed on the left of the windowIncorrect Example 2 Installed on the right of the window Installation Securing with screwsSensor unit Removing when secured with double-sided tape Securing with double-sided tapeFeatures available when using the Home Network app Testing the window/ door sensorAccessing the User’s Guide Specifications FCC and other information FCC RF Exposure WarningFCC ID can be found inside the sensor unit Customer services For hearing or speech impaired TTY users, TTYOr, contact us via the web at Or, send your request by E-mail toWarranty For United States and Puerto Rico Limited Warranty CoverageLimited Warranty Limits And Exclusions When you ship the productIf your product is not working properly For your future reference