Installation Guide
WARNING
❐This installation information is designed for experienced installers and is not intended for
Any attempt to install this product in a vehicle by anyone other than a qualified installer could cause damage to the electrical system and could result in serious personal injury
or death.
❐If your vehicle is equipped with air bag and/or
Before attempting installation of this electronic component, contact your vehicle dealer
or manufacturer to determine the required procedure and strictly follow their
instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT
OF AIR BAGS OR ACTIVATION OF THE
THE VEHICLE AND PERSONAL INJURY.
❏Overview
This product should be installed by a professional. However, if you plan to install this product yourself, your first step is to decide where to install it. The instructions in these pages will guide you through the remaining steps:
(Please refer to the “WARNING” statement above.)
¡Identify and label the car wires.
¡Connect the vehicle wires to the wires of the power con- nector.
¡Install the unit in the dashboard. ¡check the operation of the unit.
If you encounter problems, please consult your nearest professional installer.
Caution
¡Operating Instructions (including “Limited Warranty” and “Customer Services Directory”).
.....Keep for future reference in case the product needs
servicing.
¡Installation Hardware .....Needed for
❏Dashboard Specifications
Thickness Min. 4.75 mm {3/16"}
Max. 5.56 mm {7/32"}
53 mm {23/32"}
182 mm {75/32"}
This unit operates with a 12 V DC negative ground auto battery system only. Do not attempt to use it in any other system. Doing so could cause serious damage.
Before you begin installation, look for the items which are packed with your unit.
17