Porter-Cable C2150 Installation, Location of the Air Compressor, Plug, Outlets, Grounding Pin

Page 10

INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

Locate the air compressor in a clean, dry and well ventilated area. The air compressor should be located at least 12" away from the wall or other obstructions that will interfere with the flow of air. The air compressor pump and shroud are designed to allow for proper cooling. The ventilation openings on the compressor are necessary to maintain proper operating temperature. Do not place rags or other containers on or near these openings.

GROUNDING INSTRUCTIONS

RISK OF ELECTRICAL SHOCK. In the event of a short circuit, grounding reduces the risk of shock by providing

an escape wire for the electric current. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug (see following illustrations). The plug must be used with an outlet that has been installed and grounded in accordance with all local codes and ordinances.

1.The cord set and plug with this unit contains a grounding pin. This plug MUST be used with a grounded outlet.

IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.

2.Make sure the outlet being used has the same configuration as the grounded plug. DO NOT USE AN ADAPTER. See illustration.

3.Inspect the plug and cord before each use. Do not use if there are signs of damage.

Plug

Grounded

Outlets

Grounding Pin

4.If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.

IMPROPER GROUNDING CAN RESULT IN ELECTRICAL

SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

A08188

10- ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Oil Free Portable Air Compressor Death or serious injury Or moderate injury Safety Guidelines DefinitionsImportant Safety Instructions Death or serious injuryHazard Always remain in attendance withAttachments & Accessories What Could HappenTo human consumption Electricity. Like any other electricallyRepairs attempted by unqualified Your specific applicationResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Equip area of operation with a fire extinguisherGlossary SpecificationsAccessories Duty CycleAssembly Handle AssemblyPlug InstallationLocation of the Air Compressor OutletsExtension Cords Voltage and Circuit ProtectionKnow Your Air Compressor Description of Operation OperationDrain Valve Before Starting How to StopValve Pressure Release Before Each Start-Up MaintenanceHow to Start Customer ResponsibilitiesAir Filter Inspection and Replacement To Check Safety ValveTo Drain Tank To Replace or Clean Check Valve Service and AdjustmentsAir Compressor Pump Intake and Exhaust Valves Outlet Pressure Gauge To Replace RegulatorScrewdriver Open position nothing is visible Regulator Quick ConnectStorage Troubleshooting Problem Cause CorrectionBeing used Check wiring connection Limited Warranty Responsibility of Original Purchaser initial User

C2150 specifications

The Porter-Cable C2150 is a versatile and powerful tool designed to meet the demands of both professional contractors and serious DIY enthusiasts. With its robust features and modern technologies, the C2150 excels in various applications, making it a valuable addition to any tool collection.

One of the standout features of the Porter-Cable C2150 is its powerful motor, offering a reliable performance that can handle a wide range of projects. The unit is equipped with a 15-amp motor that delivers a no-load speed of up to 3,000 RPM. This ensures that users can efficiently tackle different materials, including wood and metal, enhancing productivity on the job site.

The C2150 features a dual gear system that provides precise control over speed and torque. This technology is particularly beneficial when working with delicate materials that require careful handling. The dual gear setup allows for seamless switching between high-speed and high-torque applications, making it suitable for drilling, sanding, and cutting with ease.

Another significant characteristic of the Porter-Cable C2150 is its lightweight and ergonomic design. Weighing only 5.8 pounds, the tool is easy to handle and maneuver, reducing user fatigue during extended use. The rubber over-molded grip provides additional comfort and control, allowing users to maintain a firm hold even during the most demanding tasks.

In terms of build quality, the C2150 is constructed from durable materials that can withstand the rigors of heavy-duty use. Its rugged design ensures longevity, making it a reliable choice for professionals who require tools that can perform under tough conditions.

The C2150 also features a quick-release chuck for fast bit changes, further enhancing its user-friendly design. This feature allows users to switch out drill bits swiftly, contributing to increased efficiency on the job. Additionally, the integrated LED work light illuminates dark work areas, providing better visibility and precision during intricate tasks.

In conclusion, the Porter-Cable C2150 is a powerful and versatile tool that combines advanced features and ergonomic design. With its strong motor, dual gear system, and user-friendly functionalities, it stands out as a reliable choice for both professionals and DIY enthusiasts alike. Whether completing small repairs at home or tackling larger projects on the job site, the C2150 is equipped to handle the challenges with ease and efficiency. Its durability and thoughtful design make it a valuable investment for anyone looking to enhance their tool arsenal.
Top Page Image Contents