Porter-Cable C2150 instruction manual Storage

Page 18

STORAGE

Before you store the air compressor, make sure you do the following:

1.Review the "Maintenance" section on the preceding pages and perform scheduled maintenance as necessary.

2.Set the On/Auto/Off lever to "OFF".

3.Turn the regulator counterclockwise and set the outlet pressure to zero.

4.Remove the air tool or accessory.

5.Pull ring on safety valve allowing air to bleed from the tank until tank pressure is approximately 20 psi. Release safety valve ring.

6.Drain water from air tank by opening drain valve on bottom of tank.

Water will condense in the air tank. If not drained, water will corrode and weaken the air tank causing a risk of air

tank rupture.

7.After the water has been drained, close the drain or drain valve.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.

8.Loosen knobs on handle and fold handle down for storage, retighten knobs.

RECOMMENDED

HANDLE STORAGE

ALTERNATE

HANDLE STORAGE

9.Protect the electrical cord and air hose from damage (such as being stepped on or run over). Wind them loosely around the compressor handle.

10.Store the air compressor in a clean and dry location.

A08188

18- ENG

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Oil Free Portable Air Compressor Death or serious injury Or moderate injury Safety Guidelines DefinitionsImportant Safety Instructions Death or serious injuryHazard Always remain in attendance withAttachments & Accessories What Could HappenTo human consumption Electricity. Like any other electricallyRepairs attempted by unqualified Your specific applicationResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Equip area of operation with a fire extinguisherGlossary SpecificationsAccessories Duty CycleAssembly Handle AssemblyPlug InstallationLocation of the Air Compressor OutletsExtension Cords Voltage and Circuit ProtectionOperation Know Your Air Compressor Description of OperationDrain Valve How to Stop Before StartingValve Pressure Release Before Each Start-Up MaintenanceHow to Start Customer ResponsibilitiesTo Check Safety Valve Air Filter Inspection and ReplacementTo Drain Tank Service and Adjustments To Replace or Clean Check ValveAir Compressor Pump Intake and Exhaust Valves Outlet Pressure Gauge To Replace RegulatorScrewdriver Open position nothing is visible Regulator Quick ConnectStorage Troubleshooting Problem Cause CorrectionBeing used Check wiring connection Limited Warranty Responsibility of Original Purchaser initial User

C2150 specifications

The Porter-Cable C2150 is a versatile and powerful tool designed to meet the demands of both professional contractors and serious DIY enthusiasts. With its robust features and modern technologies, the C2150 excels in various applications, making it a valuable addition to any tool collection.

One of the standout features of the Porter-Cable C2150 is its powerful motor, offering a reliable performance that can handle a wide range of projects. The unit is equipped with a 15-amp motor that delivers a no-load speed of up to 3,000 RPM. This ensures that users can efficiently tackle different materials, including wood and metal, enhancing productivity on the job site.

The C2150 features a dual gear system that provides precise control over speed and torque. This technology is particularly beneficial when working with delicate materials that require careful handling. The dual gear setup allows for seamless switching between high-speed and high-torque applications, making it suitable for drilling, sanding, and cutting with ease.

Another significant characteristic of the Porter-Cable C2150 is its lightweight and ergonomic design. Weighing only 5.8 pounds, the tool is easy to handle and maneuver, reducing user fatigue during extended use. The rubber over-molded grip provides additional comfort and control, allowing users to maintain a firm hold even during the most demanding tasks.

In terms of build quality, the C2150 is constructed from durable materials that can withstand the rigors of heavy-duty use. Its rugged design ensures longevity, making it a reliable choice for professionals who require tools that can perform under tough conditions.

The C2150 also features a quick-release chuck for fast bit changes, further enhancing its user-friendly design. This feature allows users to switch out drill bits swiftly, contributing to increased efficiency on the job. Additionally, the integrated LED work light illuminates dark work areas, providing better visibility and precision during intricate tasks.

In conclusion, the Porter-Cable C2150 is a powerful and versatile tool that combines advanced features and ergonomic design. With its strong motor, dual gear system, and user-friendly functionalities, it stands out as a reliable choice for both professionals and DIY enthusiasts alike. Whether completing small repairs at home or tackling larger projects on the job site, the C2150 is equipped to handle the challenges with ease and efficiency. Its durability and thoughtful design make it a valuable investment for anyone looking to enhance their tool arsenal.
Top Page Image Contents