Porter-Cable C2150 instruction manual Specifications, Glossary, Duty Cycle, Accessories

Page 8

 

SPECIFICATIONS

 

 

Model No.

C2150

 

Running Horsepower

1.2

 

Bore

2-3/8"

 

Stroke

1.35"

 

Voltage-Single Phase

120

* *

Minimum Branch Circuit Requirement

15 amps

*

Fuse Type

Time Delay

 

Air Tank Capacity (Gallon)

4.0

 

Approximate Cut-in Pressure

120 PSIG

 

Approximate Cut-out Pressure

150 PSIG

 

SCFM @ 40 PSIG

4.5

 

SCFM @ 90 PSIG

3.3

GLOSSARY

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL, CUL, ETL, CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to use your accessory.

When the tank pressure drops to a certain low level the motor will restart automatically. The low pressure at which the motor automatically restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air pressure in the air tank begins to build. It builds to a certain high pressure before the motor automatically shuts off - protecting your air tank from pressure higher than its capacity. The high pressure at which the motor shuts off is called "cut-out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50%-75%

average duty cycle be maintained; that is, the air compressor pump should not run more than 30-45 minutes in any given hour.

ACCESSORIES

Accessories for this unit are available at the store the unit was purchased.

A08188

8- ENG

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Oil Free Portable Air Compressor Safety Guidelines Definitions Important Safety InstructionsDeath or serious injury Or moderate injury Death or serious injuryHazard Always remain in attendance withAttachments & Accessories What Could HappenElectricity. Like any other electrically Repairs attempted by unqualifiedTo human consumption Your specific applicationResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Equip area of operation with a fire extinguisherSpecifications AccessoriesGlossary Duty CycleAssembly Handle AssemblyInstallation Location of the Air CompressorPlug OutletsExtension Cords Voltage and Circuit ProtectionDrain Valve OperationKnow Your Air Compressor Description of Operation Valve Pressure Release How to StopBefore Starting Maintenance How to StartBefore Each Start-Up Customer ResponsibilitiesTo Drain Tank To Check Safety ValveAir Filter Inspection and Replacement Air Compressor Pump Intake and Exhaust Valves Service and AdjustmentsTo Replace or Clean Check Valve To Replace Regulator Screwdriver Open position nothing is visibleOutlet Pressure Gauge Regulator Quick ConnectStorage Troubleshooting Problem Cause CorrectionBeing used Check wiring connection Limited Warranty Responsibility of Original Purchaser initial User

C2150 specifications

The Porter-Cable C2150 is a versatile and powerful tool designed to meet the demands of both professional contractors and serious DIY enthusiasts. With its robust features and modern technologies, the C2150 excels in various applications, making it a valuable addition to any tool collection.

One of the standout features of the Porter-Cable C2150 is its powerful motor, offering a reliable performance that can handle a wide range of projects. The unit is equipped with a 15-amp motor that delivers a no-load speed of up to 3,000 RPM. This ensures that users can efficiently tackle different materials, including wood and metal, enhancing productivity on the job site.

The C2150 features a dual gear system that provides precise control over speed and torque. This technology is particularly beneficial when working with delicate materials that require careful handling. The dual gear setup allows for seamless switching between high-speed and high-torque applications, making it suitable for drilling, sanding, and cutting with ease.

Another significant characteristic of the Porter-Cable C2150 is its lightweight and ergonomic design. Weighing only 5.8 pounds, the tool is easy to handle and maneuver, reducing user fatigue during extended use. The rubber over-molded grip provides additional comfort and control, allowing users to maintain a firm hold even during the most demanding tasks.

In terms of build quality, the C2150 is constructed from durable materials that can withstand the rigors of heavy-duty use. Its rugged design ensures longevity, making it a reliable choice for professionals who require tools that can perform under tough conditions.

The C2150 also features a quick-release chuck for fast bit changes, further enhancing its user-friendly design. This feature allows users to switch out drill bits swiftly, contributing to increased efficiency on the job. Additionally, the integrated LED work light illuminates dark work areas, providing better visibility and precision during intricate tasks.

In conclusion, the Porter-Cable C2150 is a powerful and versatile tool that combines advanced features and ergonomic design. With its strong motor, dual gear system, and user-friendly functionalities, it stands out as a reliable choice for both professionals and DIY enthusiasts alike. Whether completing small repairs at home or tackling larger projects on the job site, the C2150 is equipped to handle the challenges with ease and efficiency. Its durability and thoughtful design make it a valuable investment for anyone looking to enhance their tool arsenal.
Top Page Image Contents