Porter-Cable C2150 Maintenance, Before Each Start-Up, How to Start, Customer Responsibilities

Page 14

Before Each Start-Up:

1.Set the On/Auto/Off lever to "OFF".

2.Pull regulator knob out, turn counter-clockwise until it stops. Push knob in to lock in place.

3.Attach hose and accessories. NOTE: The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick connect.

Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure

rating for air tools and accessories. The regulator outlet pressure must never exceed the maximum pressure rating.

How to Start:

1.Turn the On/Auto/Off lever to "ON/AUTO" and allow tank pressure to build. Motor will stop when tank pressure reaches "cut-out" pressure.

2.Pull the regulator knob out and turn clockwise to increase pressure. When the desired pressure is reached push knob in to lock in place. The compressor is ready for use.

NOTE: Always operate the air compressor in well-ventilated areas free of gasoline or other combustible vapors. If the compressor is being used to operate a sprayer DO NOT place near the spray area.

MAINTENANCE

Customer Responsibilities

 

Before

Daily

 

 

 

each

or after

Frequently

Yearly

 

use

each

 

 

 

use

 

 

 

 

 

 

Check Safety Valve

●

 

 

 

 

 

 

 

 

Drain Tank

 

●

●1

 

Air Filter

 

 

 

Air compressor pump intake

 

 

 

●

and exhaust valves

 

 

 

 

 

 

 

 

 

 

 

 

1- more frequent in dusty or humid conditions

 

 

 

 

 

 

 

Unit cycles automatically when power is on. When performing maintenance, you may be exposed to voltage

sources, compressed air, or moving parts. Personal injuries can occur. Before performing any maintenance or repair, disconnect power source from the compressor and bleed off all air pressure.

A08188

14- ENG

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Oil Free Portable Air Compressor Death or serious injury Or moderate injury Safety Guidelines DefinitionsImportant Safety Instructions Death or serious injuryHazard Always remain in attendance withAttachments & Accessories What Could HappenTo human consumption Electricity. Like any other electricallyRepairs attempted by unqualified Your specific applicationResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Equip area of operation with a fire extinguisherGlossary SpecificationsAccessories Duty CycleAssembly Handle AssemblyPlug InstallationLocation of the Air Compressor OutletsExtension Cords Voltage and Circuit ProtectionDrain Valve OperationKnow Your Air Compressor Description of Operation Valve Pressure Release How to StopBefore Starting Before Each Start-Up MaintenanceHow to Start Customer ResponsibilitiesTo Drain Tank To Check Safety ValveAir Filter Inspection and Replacement Air Compressor Pump Intake and Exhaust Valves Service and AdjustmentsTo Replace or Clean Check Valve Outlet Pressure Gauge To Replace RegulatorScrewdriver Open position nothing is visible Regulator Quick ConnectStorage Troubleshooting Problem Cause CorrectionBeing used Check wiring connection Limited Warranty Responsibility of Original Purchaser initial User

C2150 specifications

The Porter-Cable C2150 is a versatile and powerful tool designed to meet the demands of both professional contractors and serious DIY enthusiasts. With its robust features and modern technologies, the C2150 excels in various applications, making it a valuable addition to any tool collection.

One of the standout features of the Porter-Cable C2150 is its powerful motor, offering a reliable performance that can handle a wide range of projects. The unit is equipped with a 15-amp motor that delivers a no-load speed of up to 3,000 RPM. This ensures that users can efficiently tackle different materials, including wood and metal, enhancing productivity on the job site.

The C2150 features a dual gear system that provides precise control over speed and torque. This technology is particularly beneficial when working with delicate materials that require careful handling. The dual gear setup allows for seamless switching between high-speed and high-torque applications, making it suitable for drilling, sanding, and cutting with ease.

Another significant characteristic of the Porter-Cable C2150 is its lightweight and ergonomic design. Weighing only 5.8 pounds, the tool is easy to handle and maneuver, reducing user fatigue during extended use. The rubber over-molded grip provides additional comfort and control, allowing users to maintain a firm hold even during the most demanding tasks.

In terms of build quality, the C2150 is constructed from durable materials that can withstand the rigors of heavy-duty use. Its rugged design ensures longevity, making it a reliable choice for professionals who require tools that can perform under tough conditions.

The C2150 also features a quick-release chuck for fast bit changes, further enhancing its user-friendly design. This feature allows users to switch out drill bits swiftly, contributing to increased efficiency on the job. Additionally, the integrated LED work light illuminates dark work areas, providing better visibility and precision during intricate tasks.

In conclusion, the Porter-Cable C2150 is a powerful and versatile tool that combines advanced features and ergonomic design. With its strong motor, dual gear system, and user-friendly functionalities, it stands out as a reliable choice for both professionals and DIY enthusiasts alike. Whether completing small repairs at home or tackling larger projects on the job site, the C2150 is equipped to handle the challenges with ease and efficiency. Its durability and thoughtful design make it a valuable investment for anyone looking to enhance their tool arsenal.
Top Page Image Contents