Porter-Cable CFFC350C, CFFR350C instruction manual Extension Cords, Voltage and Circuit Protection

Page 10

Extension Cords

Using extension cords is not recommended. The use of extension cords will cause voltage to drop resulting in power loss to the motor and overheating.

Instead of using an extension cord, increase the working reach of the air hose by attaching another length of hose to its end. Attach additional lengths of hose as needed.

If an extension cord must be used, be sure it is:

•a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will accept the plug on the product

•in good condition

•no longer than 50 feet

•12 gauge (AWG) or larger. (Wire size increases as gauge number decreases. 10 AWG and 8 AWG may also be used. DO NOT USE 14 OR 16 AWG.)

Voltage and Circuit Protection

Refer to the specification chart for the voltage and minimum branch circuit requirements.

Certain air compressors can

be operated on a 15 amp circuit if the following conditions are met.

1.Voltage supply to circuit must comply with the National Electrical Code.

2.Circuit is not used to supply any other electrical needs.

3.Extension cords comply with specifications.

4.Circuit is equipped with a 15 amp circuit breaker or 15 amp time delay fuse. NOTE: If compressor is connected to a circuit protected by fuses, use only time delay fuses. Time delay fuses should be marked "D" in Canada and "T" in the US.

If any of the above conditions cannot be met, or if operation of the compressor repeatedly causes interruption of the power, it may be necessary to operate it from a 20 amp circuit. It is not necessary to change the cord set.

A09770

10 - ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Pancake Compressor Or serious injury Or moderate injury Safety Guidelines DefinitionsImportant Safety Instructions Death or serious injuryWhat Could Happen How To Prevent ItAlways remain in attendance with Attachments & Accessories Or death Electricity. Like any other electricallyRepairs attempted by unqualified Conjunction with the compressor must beResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Never defeat the safety features of thisEquip area of operation with a fire extinguisher Glossary SpecificationsAccessories Duty CycleUnpacking AssemblyInstallation Location of the Air CompressorExtension Cords Voltage and Circuit ProtectionKnow Your Air Compressor OperationDescription of Operation Before First Start Up Check Valve When the airHow to Stop Drain ValveBefore Each Start-Up MaintenanceHow to Start Customer ResponsibilitiesTo Drain Tank To Check Safety ValveAir Filter Inspection Replacement Air Compressor Pump Intake and Exhaust ValvesService and Adjustments To Replace or Clean Check ValveTo Replace Regulator Storage Troubleshooting Being used Check wiring connection ENG A09770 Limited Warranty

CFFR350C, CFFC350C specifications

The Porter-Cable CFFC350C and CFFR350C are two powerful tools designed for various fastening and nailing tasks in both professional and DIY settings. Both models are part of the esteemed Porter-Cable lineup, known for their durability and high performance. Catering to finish carpenters, remodelers, and woodworkers, these tools stand out for their innovative features and advanced technologies.

The CFFC350C is a cordless finish nailer that operates on an efficient battery system, providing users with the freedom of movement without the hassle of cords. This model is equipped with a motor that delivers consistent driving power, ensuring that even the toughest materials can be easily tackled. It supports 18-gauge nails ranging from 1 to 2 inches in length, making it ideal for a variety of woodworking applications. The adjustable depth control allows users to achieve precise nail placement, enhancing the overall finish quality.

On the other hand, the CFFR350C is a cordless framing nailer that is designed for heavy-duty applications. It can drive 21-degree plastic collated framing nails ranging from 2 to 3-1/4 inches, making it suitable for framing, sheathing, and other construction tasks. This model also features a tool-free depth adjustment that allows users to quickly switch settings, promoting efficiency and convenience on the job site.

Both models utilize advanced lithium-ion battery technology, offering longer runtime and faster charging times. This ensures that users can work longer without interruptions, increasing productivity. Furthermore, the lightweight and ergonomic design of these nailers provides comfort during prolonged use, reducing operator fatigue.

In terms of usability, both the CFFC350C and CFFR350C come with a no-mar tip to prevent damage to the work surface. They also feature a jam-release mechanism, allowing for easy nail clearing in the event of a jam.

In conclusion, the Porter-Cable CFFC350C and CFFR350C nailers exemplify modern engineering targeted at enhancing performance and convenience. With their robust features, advanced technologies, and user-friendly designs, they are excellent choices for both professionals and hobbyists looking for reliable and efficient fastening solutions. Whether you're framing a house or completing fine woodworking, these tools are up to the task, making them valuable additions to any toolkit.
Top Page Image Contents