Porter-Cable CFFC350C, CFFR350C Specifications, Glossary, Duty Cycle, Accessories, Model No

Page 8

SPECIFICATIONS

 

Model No.

CFFC350C / CFFR350C

Running Horsepower

1.6

Bore

2.375"

Stroke

1.35"

Voltage-Single Phase

120/60/1

Minimum Branch Circuit Requirement

15 amps

Fuse Type

Time Delay

Air Tank Capacity (Gallon)

4

Approximate Cut-in Pressure

110 PSIG

Approximate Cut-out Pressure

135 PSIG

SCFM @ 40 PSIG

7.7

SCFM @ 90 PSIG

5.3

GLOSSARY

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL, CUL, ETL, CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety.

Cut-In Pressure: While the motor is Off, air tank pressure drops as you continue to use your accessory.

When the tank pressure drops to a certain low level the motor will restart automatically. The low pressure at which the motor automatically restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air pressure in the air tank begins to build. It builds to a certain high pressure before the motor automatically shuts Off - protecting your air tank from pressure higher than its capacity. The high pressure at which the motor shuts Off is called "cut-out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50%-75%

average duty cycle be maintained; that is, the air compressor pump should not run more than 30-45 minutes in any given hour.

ACCESSORIES

Accessories for this unit are available at the store the unit was purchased.

A09770

8 - ENG

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Pancake Compressor Safety Guidelines Definitions Important Safety InstructionsOr serious injury Or moderate injury Death or serious injuryAlways remain in attendance with How To Prevent ItWhat Could Happen Attachments & Accessories Electricity. Like any other electrically Repairs attempted by unqualifiedOr death Conjunction with the compressor must beResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsEquip area of operation with a fire extinguisher Never defeat the safety features of thisKeep children away from the air compressor at all times Specifications AccessoriesGlossary Duty CycleAssembly InstallationUnpacking Location of the Air CompressorExtension Cords Voltage and Circuit ProtectionDescription of Operation OperationKnow Your Air Compressor Check Valve When the air How to StopBefore First Start Up Drain ValveMaintenance How to StartBefore Each Start-Up Customer ResponsibilitiesTo Check Safety Valve Air Filter Inspection ReplacementTo Drain Tank Air Compressor Pump Intake and Exhaust ValvesService and Adjustments To Replace or Clean Check ValveTo Replace Regulator Storage Troubleshooting Being used Check wiring connection ENG A09770 Limited Warranty

CFFR350C, CFFC350C specifications

The Porter-Cable CFFC350C and CFFR350C are two powerful tools designed for various fastening and nailing tasks in both professional and DIY settings. Both models are part of the esteemed Porter-Cable lineup, known for their durability and high performance. Catering to finish carpenters, remodelers, and woodworkers, these tools stand out for their innovative features and advanced technologies.

The CFFC350C is a cordless finish nailer that operates on an efficient battery system, providing users with the freedom of movement without the hassle of cords. This model is equipped with a motor that delivers consistent driving power, ensuring that even the toughest materials can be easily tackled. It supports 18-gauge nails ranging from 1 to 2 inches in length, making it ideal for a variety of woodworking applications. The adjustable depth control allows users to achieve precise nail placement, enhancing the overall finish quality.

On the other hand, the CFFR350C is a cordless framing nailer that is designed for heavy-duty applications. It can drive 21-degree plastic collated framing nails ranging from 2 to 3-1/4 inches, making it suitable for framing, sheathing, and other construction tasks. This model also features a tool-free depth adjustment that allows users to quickly switch settings, promoting efficiency and convenience on the job site.

Both models utilize advanced lithium-ion battery technology, offering longer runtime and faster charging times. This ensures that users can work longer without interruptions, increasing productivity. Furthermore, the lightweight and ergonomic design of these nailers provides comfort during prolonged use, reducing operator fatigue.

In terms of usability, both the CFFC350C and CFFR350C come with a no-mar tip to prevent damage to the work surface. They also feature a jam-release mechanism, allowing for easy nail clearing in the event of a jam.

In conclusion, the Porter-Cable CFFC350C and CFFR350C nailers exemplify modern engineering targeted at enhancing performance and convenience. With their robust features, advanced technologies, and user-friendly designs, they are excellent choices for both professionals and hobbyists looking for reliable and efficient fastening solutions. Whether you're framing a house or completing fine woodworking, these tools are up to the task, making them valuable additions to any toolkit.
Top Page Image Contents