Porter-Cable CFFR350C Maintenance, Before Each Start-Up, How to Start, Customer Responsibilities

Page 13

Before Each Start-Up:

1.Place On/Auto/Off lever to "Off".

2.Turn the regulator knob counter- clockwise to set the outlet pressure to zero.

3.Attach hose and accessories.

NOTE: The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick connect socket.

Risk of Bursting. Too much air

pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for air tools and accessories. The regulator outlet pressure must never exceed the maximum

pressure rating.

How to Start:

1.Turn the On/Auto/Off lever to "On/ Auto" and allow tank pressure

to build. Motor will stop when tank pressure reaches "cut-out" pressure.

2.Turn regulator knob clockwise to increase pressure and stop when desired pressure is reached.

The compressor is ready for use.

MAINTENANCE

Customer Responsibilities

Before

Daily

each

or after

each

use

use

 

Every

100Yearly

hours

Check Safety Valve

 

 

 

Drain Tank

 

1

 

Air Filter

 

 

 

 

 

Air compressor pump intake

 

 

and exhaust valves

 

 

 

 

 

 

1- more frequent in dusty or humid conditions

 

 

 

 

 

 

Risk of Unsafe

 

should be prepared and followed. The

Operation. Unit

above routine maintenance schedule

cycles automatically when power

is geared to an air compressor in a

is on. When servicing, you may

 

 

normal working environment operating

be exposed to voltage sources,

 

 

on a daily basis. If necessary, the

compressed air, or moving parts.

schedule should be modified to

Before servicing unit unplug or

 

 

suit the conditions under which

disconnect electrical supply to

 

 

your air compressor is used. The

the air compressor, bleed tank

 

 

modifications will depend upon

of pressure, and allow the air

 

compressor to cool.

 

the hours of operation and the

To ensure efficient operation and

 

working environment. Compressors

 

in an extremely dirty and/or hostile

longer life of the air compressor,

 

 

environment will require a greater

a routine maintenance schedule

 

 

frequency of all maintenance checks.

 

 

13 - ENG

A09770

Image 13
Contents Pancake Compressor Important Safety Instructions Safety Guidelines DefinitionsOr serious injury Or moderate injury Death or serious injuryWhat Could Happen How To Prevent ItAlways remain in attendance with Attachments & Accessories Repairs attempted by unqualified Electricity. Like any other electricallyOr death Conjunction with the compressor must beHazard Warning Risk from Moving Parts Result in serious burns How To Prevent ItKeep children away from the air compressor at all times Never defeat the safety features of thisEquip area of operation with a fire extinguisher Accessories SpecificationsGlossary Duty CycleInstallation AssemblyUnpacking Location of the Air CompressorVoltage and Circuit Protection Extension CordsKnow Your Air Compressor OperationDescription of Operation How to Stop Check Valve When the airBefore First Start Up Drain ValveHow to Start MaintenanceBefore Each Start-Up Customer ResponsibilitiesAir Filter Inspection Replacement To Check Safety ValveTo Drain Tank Air Compressor Pump Intake and Exhaust ValvesTo Replace or Clean Check Valve Service and AdjustmentsTo Replace Regulator Storage Troubleshooting Being used Check wiring connection ENG A09770 Limited Warranty

CFFR350C, CFFC350C specifications

The Porter-Cable CFFC350C and CFFR350C are two powerful tools designed for various fastening and nailing tasks in both professional and DIY settings. Both models are part of the esteemed Porter-Cable lineup, known for their durability and high performance. Catering to finish carpenters, remodelers, and woodworkers, these tools stand out for their innovative features and advanced technologies.

The CFFC350C is a cordless finish nailer that operates on an efficient battery system, providing users with the freedom of movement without the hassle of cords. This model is equipped with a motor that delivers consistent driving power, ensuring that even the toughest materials can be easily tackled. It supports 18-gauge nails ranging from 1 to 2 inches in length, making it ideal for a variety of woodworking applications. The adjustable depth control allows users to achieve precise nail placement, enhancing the overall finish quality.

On the other hand, the CFFR350C is a cordless framing nailer that is designed for heavy-duty applications. It can drive 21-degree plastic collated framing nails ranging from 2 to 3-1/4 inches, making it suitable for framing, sheathing, and other construction tasks. This model also features a tool-free depth adjustment that allows users to quickly switch settings, promoting efficiency and convenience on the job site.

Both models utilize advanced lithium-ion battery technology, offering longer runtime and faster charging times. This ensures that users can work longer without interruptions, increasing productivity. Furthermore, the lightweight and ergonomic design of these nailers provides comfort during prolonged use, reducing operator fatigue.

In terms of usability, both the CFFC350C and CFFR350C come with a no-mar tip to prevent damage to the work surface. They also feature a jam-release mechanism, allowing for easy nail clearing in the event of a jam.

In conclusion, the Porter-Cable CFFC350C and CFFR350C nailers exemplify modern engineering targeted at enhancing performance and convenience. With their robust features, advanced technologies, and user-friendly designs, they are excellent choices for both professionals and hobbyists looking for reliable and efficient fastening solutions. Whether you're framing a house or completing fine woodworking, these tools are up to the task, making them valuable additions to any toolkit.