Porter-Cable CLFRP350 Installation, Location of the Air Compressor, Plug, Outlets, Grounding Pin

Page 10

INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

Locate the air compressor in a clean, dry and well ventilated area. The air compressor should be located at least 12" away from the wall or other obstructions that will interfere with the flow of air. The air compressor pump and shroud are designed to allow for proper cooling. The ventilation openings on the compressor are necessary to maintain proper operating temperature. Do not place rags or other containers on or near these openings.The air filter must be kept clear of obstructions which could reduce air flow to the air compressor.

GROUNDING INSTRUCTIONS

RISK OF ELECTRICAL SHOCK. In the event of a short circuit, grounding reduces the risk of shock by providing

an escape wire for the electric current. This air compressor must be properly grounded.

The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug (see following illustrations). The plug must be used with an outlet that has been installed and grounded in accordance with all local codes and ordinances.

1.The cord set and plug with this unit contains a grounding pin. This plug MUST be used with a grounded outlet.

IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.

2.Make sure the outlet being used has the same configuration as the grounded plug. DO NOT USE AN ADAPTER. See illustration.

3.Inspect the plug and cord before each use. Do not use if there are signs of damage.

Plug

Grounded

Outlets

Grounding Pin

4.If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded, have the installation checked by a qualified electrician.

IMPROPER GROUNDING CAN RESULT IN ELECTRICAL

SHOCK.

Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electrician.

Repairs to the cord set or plug MUST be made by a qualified electrician.

A10055

10- ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Direct Drive Oil Lube Portable Air Compressor Death or serious injury Or moderate injury Safety Guidelines DefinitionsImportant Safety Instructions Death or serious injuryHazard Always remain in attendance withAttachments & Accessories What Could HappenTo human consumption Electricity. Like any other electricallyRepairs attempted by unqualified Your specific applicationResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Equip area of operation with a fire extinguisherGlossary SpecificationsAccessories Duty CycleAssembly To Add Oil To PumpPlug InstallationLocation of the Air Compressor OutletsExtension Cords Voltage and Circuit ProtectionOperation Know Your Air Compressor Description of OperationHow to Use Your Unit Before StartingHow to Start Before Each Start-UpCustomer Responsibilities MaintenanceTo Check Safety Valve To Drain TankOil ChangingAir Filter Inspection and Replacement MotorService and Adjustments To Replace or Clean Check ValveStorage Troubleshooting Problem Cause CorrectionPressure reading Problem Cause Correction Squealing Limited Warranty Responsibility of Original Purchaser initial User

CLFRP350 specifications

The Porter-Cable CLFRP350 is a state-of-the-art cordless finish nailer that stands out due to its robust design and impressive performance capabilities. This tool is engineered specifically for professionals and DIY enthusiasts who value efficiency, convenience, and precision in their woodworking and renovation tasks. One of the primary features of the CLFRP350 is its ability to drive 18-gauge brad nails and 16-gauge finish nails, making it an incredibly versatile option for a range of projects, from trimming and molding to furniture assembly and cabinet construction.

This nailer boasts a lightweight and ergonomic design, allowing for extended use without causing fatigue. Weighing just over four pounds, the CLFRP350 is easy to maneuver, and its balanced weight distribution ensures stability when in use. The tool also features an adjustable depth of drive, which enables users to set the nail depth based on the material they are working with, ensuring a clean and professional finish every time.

One of the hallmark technologies of the Porter-Cable CLFRP350 is its innovative cordless operation powered by a 20V Max lithium-ion battery. This feature eliminates the constraints of cords and hoses, allowing for maximum flexibility when working in various environments. The battery technology ensures longer runtime and faster recharge times, meaning users can spend more time working and less time waiting.

The CLFRP350 is equipped with a tool-free jam release mechanism that simplifies maintenance and ensures uninterrupted workflow. If a nail does jam, users can quickly and easily clear it without the need for additional tools, minimizing downtime and allowing projects to progress smoothly.

In addition, this nailer incorporates a sequential and contact firing mode, giving users the freedom to choose the method that best fits their application needs. This dual firing mode allows for high-speed nailing with the contact option while providing greater control and accuracy with the sequential mode, catering to a variety of finishing tasks.

Safety is another essential focus of the CLFRP350, which features a safety tip that helps prevent accidental firing. The included belt hook also adds convenience, allowing users to keep their hands free while transporting the tool.

In summary, the Porter-Cable CLFRP350 combines innovative technology with practical design to deliver a reliable and efficient nailer suitable for both professionals and DIY enthusiasts. Its cordless capabilities, adjustable depth control, and easy maintenance features set it apart as a valuable addition to any toolkit.
Top Page Image Contents