Porter-Cable CLFRP350 instruction manual Assembly, To Add Oil To Pump

Page 9

ASSEMBLY

To Add Oil To Pump

Risk of Unsafe Operation. DO NOT ATTEMPT TO OPERATE THIS AIR COMPRESSOR WITHOUT FIRST ADDING OIL TO

THE CRANKCASE. Serious damage can result from even limited operation unless filled with oil and broken in correctly. Make sure to closely follow initial start-up procedures.

Risk of Unsafe Operation. COMPRESSORS ARE SHIPPED WITHOUT OIL. A small amount of oil may be present in the

pump upon receipt of the air compressor. This is due to plant testing and does not mean the pump contains oil.

Risk of Unsafe Operation. Multi-Viscosity motor oils, like 10W30, should not be used in an air compressor. They leave

carbon deposits on critical components, thus reducing performance and compressor life. Use air compressor oil only.

NOTE: Use an oil specifically formulated for use in an air compressor, such as Porter-Cable PAS1 air compressor oil. Oil may be found at the store where the air compressor was purchased.

1.Place unit on a level surface.

Risk from Flying Object. Drain tank to release air

pressure before removing the dipstick. See "To Drain Tank" in the Maintenance section.

Risk from Flying Object. Make sure air vent (B) in dipstick is free from debris. If air vent is

blocked pressure can build in crankcase causing damage to air compressor and possible personal injury. See Troubleshooting for correction.

2.Remove dipstick (A) and slowly fill crankcase with oil. Crankcase capacity is 6 fluid ounces (177.4 ml). Oil level should be at the + (full) mark on the dipstick.

B A

+ full

+

- add

-

NOTE: If the oil is added too quickly, it will overflow and appear to be full.

3.Replace dipstick.

9- ENG

A10055

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Direct Drive Oil Lube Portable Air Compressor Important Safety Instructions Safety Guidelines DefinitionsDeath or serious injury Or moderate injury Death or serious injuryAlways remain in attendance with HazardWhat Could Happen Attachments & AccessoriesRepairs attempted by unqualified Electricity. Like any other electricallyTo human consumption Your specific applicationHazard Warning Risk from Moving Parts Result in serious burns How To Prevent ItEquip area of operation with a fire extinguisher Keep children away from the air compressor at all timesAccessories SpecificationsGlossary Duty CycleTo Add Oil To Pump AssemblyLocation of the Air Compressor InstallationPlug OutletsVoltage and Circuit Protection Extension CordsKnow Your Air Compressor Description of Operation OperationBefore Starting How to Use Your UnitBefore Each Start-Up How to StartTo Check Safety Valve MaintenanceCustomer Responsibilities To Drain TankChanging OilMotor Air Filter Inspection and ReplacementTo Replace or Clean Check Valve Service and AdjustmentsStorage Problem Cause Correction TroubleshootingPressure reading Problem Cause Correction Squealing Responsibility of Original Purchaser initial User Limited Warranty

CLFRP350 specifications

The Porter-Cable CLFRP350 is a state-of-the-art cordless finish nailer that stands out due to its robust design and impressive performance capabilities. This tool is engineered specifically for professionals and DIY enthusiasts who value efficiency, convenience, and precision in their woodworking and renovation tasks. One of the primary features of the CLFRP350 is its ability to drive 18-gauge brad nails and 16-gauge finish nails, making it an incredibly versatile option for a range of projects, from trimming and molding to furniture assembly and cabinet construction.

This nailer boasts a lightweight and ergonomic design, allowing for extended use without causing fatigue. Weighing just over four pounds, the CLFRP350 is easy to maneuver, and its balanced weight distribution ensures stability when in use. The tool also features an adjustable depth of drive, which enables users to set the nail depth based on the material they are working with, ensuring a clean and professional finish every time.

One of the hallmark technologies of the Porter-Cable CLFRP350 is its innovative cordless operation powered by a 20V Max lithium-ion battery. This feature eliminates the constraints of cords and hoses, allowing for maximum flexibility when working in various environments. The battery technology ensures longer runtime and faster recharge times, meaning users can spend more time working and less time waiting.

The CLFRP350 is equipped with a tool-free jam release mechanism that simplifies maintenance and ensures uninterrupted workflow. If a nail does jam, users can quickly and easily clear it without the need for additional tools, minimizing downtime and allowing projects to progress smoothly.

In addition, this nailer incorporates a sequential and contact firing mode, giving users the freedom to choose the method that best fits their application needs. This dual firing mode allows for high-speed nailing with the contact option while providing greater control and accuracy with the sequential mode, catering to a variety of finishing tasks.

Safety is another essential focus of the CLFRP350, which features a safety tip that helps prevent accidental firing. The included belt hook also adds convenience, allowing users to keep their hands free while transporting the tool.

In summary, the Porter-Cable CLFRP350 combines innovative technology with practical design to deliver a reliable and efficient nailer suitable for both professionals and DIY enthusiasts. Its cordless capabilities, adjustable depth control, and easy maintenance features set it apart as a valuable addition to any toolkit.
Top Page Image Contents