Porter-Cable CLFRP350 instruction manual Oil, Changing

Page 16

5.Drain water from air tank by opening drain valve (counter-clockwise) on bottom of tank.

Risk of Bursting. Water will condense in the air tank. If not drained, water will corrode and weaken the air tank

causing a risk of air tank rupture.

6.After the water has been drained, close the drain valve (clockwise). The air compressor can now be stored.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, and then reinstalled.

Oil

Risk of Bursting. Drain tank to release air pressure before removing the dipstick or oil drain plug. See "To Drain

Tank" in this section.

Risk of Burns. Compressor head and cylinder sleeve are very hot. Do not touch. Allow compressor to cool prior

to servicing.

Risk from Flying Objects. Make sure air

vent (C) in dipstick is free from debris. If air vent is blocked pressure can build in crankcase causing damage to air compressor and possible personal injury. See Troubleshooting for correction.

Risk of Unsafe Operation. Overfilling

with oil will cause premature compressor failure. Do not overfill.

Checking

 

C

 

 

A

 

 

(+)Full

+

B

(-)Add

-

 

 

1.Set the On/Auto/Off lever to "OFF" and unplug unit.

2.Remove dipstick (A) and check oil on dipstick for visual signs of contaminants (water, dirt, etc).

3.Wipe oil from dipstick.

4.Replace dipstick and allow oil to collect on dipstick.

5.Remove dipstick and check oil level on dipstick, + mark indicates full and the - mark indicates add oil. If oil level is below - mark, slowly add oil until it reaches the + (full) mark on the dipstick.

NOTE: Use an oil specifically formulated for use in an air compressor, such as Porter-Cable PAS1 air compressor oil. Oil may be found at the store where the air compressor was purchased.

6.Replace dipstick (A).

Changing

1.Set the On/Auto/Off lever to "OFF" and unplug unit.

2.Remove the dipstick (A).

3.Remove the oil drain plug (B) and drain oil into a suitable container.

A10055

16- ENG

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Direct Drive Oil Lube Portable Air Compressor Safety Guidelines Definitions Important Safety InstructionsDeath or serious injury Or moderate injury Death or serious injuryHazard Always remain in attendance withAttachments & Accessories What Could HappenElectricity. Like any other electrically Repairs attempted by unqualifiedTo human consumption Your specific applicationResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Equip area of operation with a fire extinguisherSpecifications AccessoriesGlossary Duty CycleAssembly To Add Oil To PumpInstallation Location of the Air CompressorPlug OutletsExtension Cords Voltage and Circuit ProtectionOperation Know Your Air Compressor Description of OperationHow to Use Your Unit Before StartingHow to Start Before Each Start-UpMaintenance To Check Safety ValveCustomer Responsibilities To Drain TankOil ChangingAir Filter Inspection and Replacement MotorService and Adjustments To Replace or Clean Check ValveStorage Troubleshooting Problem Cause CorrectionPressure reading Problem Cause Correction Squealing Limited Warranty Responsibility of Original Purchaser initial User

CLFRP350 specifications

The Porter-Cable CLFRP350 is a state-of-the-art cordless finish nailer that stands out due to its robust design and impressive performance capabilities. This tool is engineered specifically for professionals and DIY enthusiasts who value efficiency, convenience, and precision in their woodworking and renovation tasks. One of the primary features of the CLFRP350 is its ability to drive 18-gauge brad nails and 16-gauge finish nails, making it an incredibly versatile option for a range of projects, from trimming and molding to furniture assembly and cabinet construction.

This nailer boasts a lightweight and ergonomic design, allowing for extended use without causing fatigue. Weighing just over four pounds, the CLFRP350 is easy to maneuver, and its balanced weight distribution ensures stability when in use. The tool also features an adjustable depth of drive, which enables users to set the nail depth based on the material they are working with, ensuring a clean and professional finish every time.

One of the hallmark technologies of the Porter-Cable CLFRP350 is its innovative cordless operation powered by a 20V Max lithium-ion battery. This feature eliminates the constraints of cords and hoses, allowing for maximum flexibility when working in various environments. The battery technology ensures longer runtime and faster recharge times, meaning users can spend more time working and less time waiting.

The CLFRP350 is equipped with a tool-free jam release mechanism that simplifies maintenance and ensures uninterrupted workflow. If a nail does jam, users can quickly and easily clear it without the need for additional tools, minimizing downtime and allowing projects to progress smoothly.

In addition, this nailer incorporates a sequential and contact firing mode, giving users the freedom to choose the method that best fits their application needs. This dual firing mode allows for high-speed nailing with the contact option while providing greater control and accuracy with the sequential mode, catering to a variety of finishing tasks.

Safety is another essential focus of the CLFRP350, which features a safety tip that helps prevent accidental firing. The included belt hook also adds convenience, allowing users to keep their hands free while transporting the tool.

In summary, the Porter-Cable CLFRP350 combines innovative technology with practical design to deliver a reliable and efficient nailer suitable for both professionals and DIY enthusiasts. Its cordless capabilities, adjustable depth control, and easy maintenance features set it apart as a valuable addition to any toolkit.
Top Page Image Contents