Porter-Cable CLFRP350 instruction manual Glossary, Duty Cycle, Specifications, Accessories

Page 8

GLOSSARY

Become familiar with these terms before operating the unit. CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL, CUL, ETL, CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to use your accessory. When the tank pressure drops to a certain low level the motor will restart automatically. The low pressure at which the motor automatically restarts is called "cut-in" pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air pressure in the air tank begins to build. It builds to a certain high pressure before the motor automatically shuts off - protecting your air tank from pressure higher than its capacity. The high pressure at which the motor shuts off is called "cut-out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50%-75% average duty cycle be maintained; that is, the air compressor pump should not run more than 30-45 minutes in any given hour.

SPECIFICATIONS

 

Model No.

CLFRP350

Running Horsepower

1.3

Bore

2.363"

Stroke

0.890"

Voltage-Single Phase

120

Minimum Branch Circuit Requirement

15 amps

Fuse Type

Time Delay

Air Tank Capacity (Gallon)

4.3

Approximate Cut-in Pressure

150 PSIG

Approximate Cut-out Pressure

180 PSIG

SCFM @ 40 PSIG

5.7

SCFM @ 90 PSIG

4.4

ACCESSORIES

Accessories for this unit are available at the store the unit was purchased.

A10055

8- ENG

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Direct Drive Oil Lube Portable Air Compressor Safety Guidelines Definitions Important Safety InstructionsDeath or serious injury Or moderate injury Death or serious injuryHazard Always remain in attendance withAttachments & Accessories What Could HappenElectricity. Like any other electrically Repairs attempted by unqualifiedTo human consumption Your specific applicationResult in serious burns How To Prevent It Hazard Warning Risk from Moving PartsKeep children away from the air compressor at all times Equip area of operation with a fire extinguisherSpecifications AccessoriesGlossary Duty CycleAssembly To Add Oil To PumpInstallation Location of the Air CompressorPlug OutletsExtension Cords Voltage and Circuit ProtectionOperation Know Your Air Compressor Description of OperationHow to Use Your Unit Before StartingHow to Start Before Each Start-UpMaintenance To Check Safety ValveCustomer Responsibilities To Drain TankOil ChangingAir Filter Inspection and Replacement MotorService and Adjustments To Replace or Clean Check ValveStorage Troubleshooting Problem Cause CorrectionPressure reading Problem Cause Correction Squealing Limited Warranty Responsibility of Original Purchaser initial User

CLFRP350 specifications

The Porter-Cable CLFRP350 is a state-of-the-art cordless finish nailer that stands out due to its robust design and impressive performance capabilities. This tool is engineered specifically for professionals and DIY enthusiasts who value efficiency, convenience, and precision in their woodworking and renovation tasks. One of the primary features of the CLFRP350 is its ability to drive 18-gauge brad nails and 16-gauge finish nails, making it an incredibly versatile option for a range of projects, from trimming and molding to furniture assembly and cabinet construction.

This nailer boasts a lightweight and ergonomic design, allowing for extended use without causing fatigue. Weighing just over four pounds, the CLFRP350 is easy to maneuver, and its balanced weight distribution ensures stability when in use. The tool also features an adjustable depth of drive, which enables users to set the nail depth based on the material they are working with, ensuring a clean and professional finish every time.

One of the hallmark technologies of the Porter-Cable CLFRP350 is its innovative cordless operation powered by a 20V Max lithium-ion battery. This feature eliminates the constraints of cords and hoses, allowing for maximum flexibility when working in various environments. The battery technology ensures longer runtime and faster recharge times, meaning users can spend more time working and less time waiting.

The CLFRP350 is equipped with a tool-free jam release mechanism that simplifies maintenance and ensures uninterrupted workflow. If a nail does jam, users can quickly and easily clear it without the need for additional tools, minimizing downtime and allowing projects to progress smoothly.

In addition, this nailer incorporates a sequential and contact firing mode, giving users the freedom to choose the method that best fits their application needs. This dual firing mode allows for high-speed nailing with the contact option while providing greater control and accuracy with the sequential mode, catering to a variety of finishing tasks.

Safety is another essential focus of the CLFRP350, which features a safety tip that helps prevent accidental firing. The included belt hook also adds convenience, allowing users to keep their hands free while transporting the tool.

In summary, the Porter-Cable CLFRP350 combines innovative technology with practical design to deliver a reliable and efficient nailer suitable for both professionals and DIY enthusiasts. Its cordless capabilities, adjustable depth control, and easy maintenance features set it apart as a valuable addition to any toolkit.
Top Page Image Contents