Porter-Cable (Model TS220LS) Functional Description, Unpacking and Cleaning, Assembly, Foreword

Page 7

FUNCTIONAL DESCRIPTION

FOREWORD

Delta ShopMaster Model TS220LS has big saw capacity at an economical price. The Delta ShopMaster Model TS220LS has an extra large, 17½"x34" aluminum table and is powered by a heavy-duty 15 amp. motor with a floating jackshaft gear - the most powerful in its class. This saw is designed to give high quality performance with depth of cut capacity up to 3" (76mm) at 90° and 2" (51mm) at 45° for clean cutting of standard stock sizes. This package includes the saw, a metal stand, rip fence, miter gage, see-through blade guard with splitter and anti-kickback fingers, a 10” carbide- tipped saw blade, table insert and blade wrenches.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

ASSEMBLY

TABLE SAW PARTS

1- Saw

2- Extension Wing

3- 1/4"- Flat Washer for Mounting Extension Wing (3) 4- 1/4"- Lockwasher for Mounting Extension Wing (3) 5- 1/4-20 x 5/8" Hex Head Screw for Mounting

Extension Wing (3)

1

2

4 3 5

Fig. 2

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Table Saw General Safety Rules Safety Guidelines DefinitionsImportant Safety Instructions Stay ALERT, Watch What YOU are DOING, Failure to Follow These Rules MAY Result in Serious InjuryFailure to Follow These Rules MAY Result in Serious Injury Additional Safety Rules for Table SawsGrounding Instructions Power ConnectionsMotor Specifications Volt Single Phase OperationMinimum Gauge Extension Cord Extension CordsForeword Unpacking and CleaningAssembly Functional DescriptionPage Stand Parts SAW to Stand Stand AssemblyAssembling Blade Raising and Lowering Handwheel Blade Guard Splitter Assembly Page Guide Rail to SAW Extension WingMiter Gage RIP FenceMiter Gage Holder Disconnect Machine from Power SourceOutfeed Support Overload Protection Operating Controls and AdjustmentsLocking Switch OFF Position Starting and Stopping SAWBlade Tilting Control Adjusting 90 and 45 Degree Positive StopsTo Adjust Positive Stop AT 90 Degrees To Adjust Positive Stop AT 45 DegreesMiter Gage Operation and Adjustments RIP Fence Operation AdjustmentsC B Changing the Blade Adjusting Blade Parallel to Miter Gage SlotsACB Common Sawing Operations Never USE the Fence AS a CUT-OFF Gage When CROSS-CUTTINGCROSS-CUTTING Constructing a Push Stick RippingAccessory Dado Cutterhead Using Auxiliary Woodfacing on RIP FenceAttach the dado head set D , to the saw arbor Constructing a Featherboard Constructing a Push Stick PushstickAccessories Canadian PORTER-CABLE Delta Service Centers
Top Page Image Contents