ASSEMBLING BLADE
RAISING AND LOWERING
HANDWHEEL
1.Insert M6x1x55mm cheese head screw (14) Fig. 3, through handle (E) Fig. 5 and assemble handle (E) to handwheel (A) by threading screw (D) Fig. 5 clockwise into handwheel.
2.Fig. 6, illustrates the handle (E) assembled to handwheel (A).
3.Assemble handwheel (A) Fig. 7, to shaft (B) making sure the flat on inside of handwheel lines up with flat on shaft.
4.Fasten handwheel (A) Fig. 8, to shaft (B) Fig. 7, using a M6x1x12mm flat head screw (C) Fig. 8.
Fig. 5
Fig. 6
A
B
Fig. 7
C
A
Fig. 8
11