RECEIVING
Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
Contents:
Container #1
1saw body
1
1trunnion support
1main table
1extension table
2table lock knobs
1table pin
1work light
1blade hook
2fence hooks
2miter gauge hooks
1bag of fasteners
1rip fence & rail assembly
1blade tension handle
1instruction manual
1warranty card
Container #2
1stand with motor
1miter gauge
1pulley cover
1fence body
INSTALLATION & ASSEMBLY
Tools required
3/8" to 1" combination wrench set and adjustable wrench
3mm hex wrench
#1 and #2 cross point screwdrivers
NOTE: If further clarification is needed for any of the following assembly procedures, consult the exploded views at the back of this manual.
1.Remove loose items from inside of stand.
2.Place cabinet stand upright on a level surface. If desired, the stand can be further stabilized by securing it to the floor with lag screws through the inside corner holes. If using a mobile base, lock the casters before assembling or operating the band saw.
11