Shipping Location of Duct Flanges Size 060 Only, Ð7Ð

Install Flanges for Ductwork Connections (564A/764A060 only)

The size 060 units are shipped with ¯anges which must be ®eld-installed on the unit.

To install unit ¯anges:

1.Five pieces of ¯ange are shipped on the return air open- ing of the unit. Remove the ¯anges from the shipping position. See Fig. 9. Screws are ®eld-supplied.

2.One piece of ¯ange is used as it is shipped (straight). Bend the other 4 pieces at right angles.

3.Install the straight ¯ange on the right side of the re- turn air opening in holes provided. See Fig. 10. Flanges should stick out from unit to allow for connection of ductwork.

4.Install 2 hand-formed ¯anges onto return air opening in holes provided to form rectangle around the return air opening.

5.Install remaining 2 hand-formed ¯anges around dis- charge air opening in holes provided.

6.Ductwork can now be attached to ¯anges.

Adhere to the following criteria when selecting, sizing, and installing the duct system:

1.Select and size ductwork, supply-air registers, and return- air grilles according to ASHRAE (American Society of Heating, Refrigeration, and Air Conditioning Engi- neers) recommendations.

CAUTION: When drilling the duct system fastening holes into the side of the unit for duct ¯anges, do not drill deeper than 3¤4 in., and use extreme care not to puncture the coil or coil tubes. See Fig. 11.

2.Use ¯exible transition between rigid ductwork and unit to prevent transmission of vibration. The transition may be screwed or bolted to duct ¯anges. Use suitable gas- kets to ensure weathertight and airtight seal.

19.17″ 3.92″

Fig. 9 Ð Shipping Location of Duct Flanges

(Size 060 Only)

Fig. 11 Ð Area Not To Be Drilled More Than 3¤4-in.

3. Size ductwork for cooling air quantity (cfm).

4. Adequately insulate and weatherproof all ductwork located outdoors. Insulate ducts passing through un- conditioned space, and use vapor barrier in accordance with latest issue of SMACNA (Sheet Metal and Air Conditioning Contractors National Association) and ACCA (Air Conditioning Contractors of America) minimum installation standards for heating and air conditioning systems. Secure all ducts to building structure.

5. Flash, weatherproof, and vibration-isolate all openings in building structure in accordance with local codes and good building practices.

6. Air ®lters should be installed in return-air ductwork. Return-air ®lter grille or ®lter tracks in duct may be used.

Figure 12 shows a typical duct system with unit installed.

Fig. 10 Ð Installation of Duct Flanges

(Size 060 Only)

Ð7Ð

764A specifications

The Bryant 764A is a high-performance air conditioning and heating system that exemplifies efficiency and reliability for residential and commercial use. Designed to deliver optimal comfort in various climates, the 764A is known for its impressive energy efficiency ratings and advanced technologies.

One of the standout features of the Bryant 764A is its variable speed compressor. This innovative component allows the system to adjust its output according to the specific cooling or heating demands of the environment. By operating at different speeds, the compressor can maintain a consistent indoor temperature while using less energy compared to traditional single-stage systems. This not only enhances comfort but also contributes to significant energy savings over time.

The Bryant 764A is equipped with a smart thermostat that offers precise control over indoor climates. This thermostat can be programmed to adjust temperatures based on user preferences and schedules, further improving energy efficiency. Users can also control the system remotely via a smartphone app, ensuring comfort is just a tap away.

In terms of its construction, the Bryant 764A is built with durability in mind. The unit features a robust cabinet designed to withstand harsh weather conditions, which extends the lifespan of the system. Additionally, its sound-dampening technology minimizes operational noise, creating a more peaceful indoor environment.

The 764A incorporates advanced filtration systems to improve indoor air quality. With allergen filtration capabilities, it effectively reduces dust, pollen, and other airborne particles, making it an excellent choice for allergy sufferers. This focus on air quality aligns with Bryant's commitment to creating healthier living spaces.

Moreover, the Bryant 764A is designed with environmentally friendly refrigerants, aligning with modern standards for reducing greenhouse gas emissions. This commitment to sustainability is becoming increasingly important for consumers looking to reduce their environmental footprint.

Overall, the Bryant 764A stands out as a comprehensive solution for heating and cooling needs. With its variable speed technology, smart thermostat, durable construction, and focus on air quality, it offers both efficiency and comfort, making it a wise investment for any property owner looking to enhance their indoor environment.