Multiquip GB2000 manual TransporTing saFeTy,  never lift the equipment while engine is running

Page 10

Safety Information

TransporTing saFeTy

CauTion

Before lifting, make sure that light tower parts are not damaged and screws are not loosened or lost.

alWays make sure crane or lifting device has been properly secured to lifting hook of the equipment.

never lift the equipment while engine is running.

Remove fan power cord from junction box before towing.

Make sure tower (mast) is in the stowed position and the GB2000 is removed from the mast before lifting.

REMOVE

STOWEDGB2000

POSITIONBEFORE

TRANSPORTING

MAST

LOCK

REMOVE

FAN

POWER

CORD

alWays Make sure rear mast lock is secure before lifting.

Use adequate lifting cable (wire or rope) of suffi cient strength.

Use one point suspension hook and lift straight upwards.

LIFTING BALE

LIGHT TOWER

FORKLIFT

POCKETS

If lifting through pockets, make sure forks of forklift are inserted in pockets as far as possible before lifting.

Place chock blocks underneath wheel to prevent rolling while parked.

Place support blocks underneath the trailer’s bumper to prevent tipping while parked.

Use the trailer’s swivel jack to adjust the trailer height to a level position while parked.

never allow any person or animal to stand underneath the equipment while lifting.

do noT lift equipment to unnecessary heights. loading and Tie-down on Flatbed Truck

NOTICE

Before loading light tower to fl atbed truck, disconnect all connectors and tie-wrap the cables against the T-bar to prevent damage to the cables and connectors.

Remove and stow the GB2000 in a safe place where it will not get damaged before loading the light tower onto a fl atbed truck, towing, or shipping via a container.

When loading onto fl atbed truck, make sure that front jackstand of light tower is retracted and in the horizontal position so that the foot does not make contact with the

deck fl oor.

FRONT JACKSTAND

RETRACTED

TONGUE

TRANSPORT

 

 

TIE-DOWN

 

POINT (4)

SIDE

REAR

JACK

JACK

STAND (2)

STAND (2)

Make sure that the two side (left and right) and two rear jackstands are in the vertical postion, slightly extended, so that each foot makes contact with the deck fl oor.

Straps and chains should be routed through the transport tie-down points located beneath each corner of the cabinet to allow even application of force to the front and rear of the machine.

do noT secure the unit by running a strap or chain over the tongue of the light tower. This may cause severe damage to the unit.

page 10 —gb2000 balloon light• operation and parts manual — rev. #3 (08/30/12)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model GB2000 Proposition 65 warning Table of Contents GB2000 Balloon LightChoose from three easy options Safety information SaFeTy messagesGeneral saFeTy LighT ToWer saFeTy Lamp saFeTyEngine saFeTy  The engine of this equipment Requires an adequate freeFuel saFeTy ToWing saFeTy lighT ToWerTransporTing saFeTy  never lift the equipment while engine is runningPower Cord/Cable safety EleCTriCal saFeTyGrounding safety BaTTery saFeTy EnvironmenTal saFeTySpecifications SpecificationsDimensions Type 1 AdapterFootcandle plot Footcandle PlotGeneral Information Page Type 1 Components S/N g1900118 and below GB2000 Components Type 1 S/N G1900118 And BelowType 2 Components S/N g1900119 and above GB2000 Components Type 2 S/N G190019 And AboveDisassembly Type 1 setup S/N G1900118 and belowPReparation Assembly Lamp RemovalLamp cable connections lt12 Fan/Balloon Power cable ConnectionPIN Lamp Power cable Connection Lamp cable Connections MLTType 2 setup S/N G1900119 and above Power DisconnectionLamp adapter Plate mounting Installation Remove the adapter plate kit hardware from its containerLock Washer HEX NUT Junction box mounting Fan power cable connectionBalloon Power cable Lamp mountingRear Front Lamp lighting options Lamp Cable connectionsGB2000 Lamp Lamp Lamp Option 6 Lighting Configuration Removing balloOn protective cover OperationInflating Balloon and Turning on LAMPs LT12 only Inflating Balloon and Turning on LAMPs mlt only Deflating and storing balloonMaintenance Replacing LampReplacing Balloon Symptom Possible Problem Solution Wiring diagram Explanation of Code in Remarks Column Suggested Spare Parts Gb2000 bALLOON Light 1 to 3 unitsElectrical assy Part Name QTY Remarks Electrical assy Plate CAP Bracket and J-BOX assy. S/N G1900118 and below Junction BOX Relay Bracket and J-BOX assy. S/N G1900119 and Above Screw & Washer M3 X Terms and Conditions of Sale Parts FreighT poliCyPage HERE’S HOW to GET Help
Related manuals
Manual 48 pages 36.64 Kb

GB2000 specifications

The Multiquip GB2000 is a cutting-edge generator designed to meet the needs of a variety of industries, offering reliable and efficient power solutions. Built with advanced technology and user-friendly features, the GB2000 is tailored for both professionals and contractors who require consistent performance in demanding environments.

One of the standout characteristics of the GB2000 is its robust engine, which is engineered for high efficiency and low emissions. This generator is powered by a high-performance engine that provides a substantial power output, ensuring that it can support a wide range of devices and tools. The emphasis on performance makes it suitable for construction sites, events, and emergency backup applications.

The GB2000 also boasts a compact and durable design, making it easy to transport and store. Its lightweight frame does not compromise on durability, as it is built from high-quality materials that can withstand the rigors of daily use. This portability is enhanced by built-in handles and a well-balanced structure, allowing users to maneuver it effortlessly in various settings.

Another significant feature of the GB2000 is its digital control panel, which provides real-time information about power output, fuel levels, and operational status. This intuitive control interface simplifies operation and enhances user experience, allowing users to monitor their power needs effectively and make quick adjustments as necessary.

In terms of safety, the Multiquip GB2000 incorporates several protective measures. This includes automatic low oil shutdown, circuit breaker protection, and a robust frame that protects the engine from external impacts. These features ensure the longevity of the generator while also providing peace of mind to users in high-demand situations.

Technologically, the GB2000 utilizes an advanced inverter system that delivers clean and stable power, crucial for sensitive electronic devices. This inverter technology not only improves fuel efficiency but also minimizes noise production, making it ideal for use in environments where sound levels are a concern.

Overall, the Multiquip GB2000 combines power, portability, and advanced technology, making it a top contender in the portable generator market. Its user-friendly design, safety features, and robust performance ensure it meets the diverse requirements of modern power users, establishing it as a reliable choice for both everyday and emergency power needs.
Top Page Image Contents