Type 1 setup S/N G1900118 and below, PReparation

type 1 setup (S/N G1900118 and below)

PReparation

1.Place the light tower in an area free of dirt and debris with enough clearance as not to interfere with any overhead obstructions. Make sure it is on secure level ground with chock blocks underneath each wheel to prevent the light tower from rolling.

DANGER

ALWAYS make sure the area above light tower is open and clear of overhead power lines and other obstructions. The tower extends in excess of 30 ft. (9 meters). Contact with overhead power lines or other obstructions could result in equipment damage, serious injury or death!

2.If the light tower is in the deployed position, place the tower mast into the cradle support (stowed position). See Figure 5. Make sure cradle lock/release pin has been inserted and the mast is locked.

STOWED POSITION

MAST LOCK

Figure 5. Light Tower in Stowed Position

Disassembly

1.For LT12D light towers, disconnect the negative cable (black) from battery. See Figure 6.

DISCONNECT

NEGATIVE

BATTERY CABLE

Figure 6. Disconnecting Battery

2.For MLT series light towers disconnect the 4-pin power cable (Figure 7) from the 125 VAC twist-lock receptacle on the front panel of the generator.

MLT

LIGHT TOWER

WHISPERWATT
7KW AC
Model
		DA-7000SS
						ON
							STOP	RUN
						OFF			HEAT
			AC VOL		IDLE	CONTROL
		AC CIRCUIT	AC VOL			CONTROL
		AC CIRCUIT	TMETER
		BREAKER			00000				S	TART
7000 WATT					00000					TART
D	IESEL PO				HOURS		STARTER
		WERED AC	GENERATOR		HOUR	METER	STARTER		SWITCH
20A
		25A
		120V		25A
						25A
					120/240V

DISCONNECT

TO BALLAST

4-PIN POWER COMPARTMENT CABLE

Figure 7. MLT Power Cable Removal

3.Disconnect the lamp power cables from receptacles J1 thru J4 on the T-Bar assembly. See Figure 8.

UNPLUG THE

CABLES FROM THE

RECEPTACLES

J4	J3	J2
	J3		J1

Figure 8. Remove Cables

4.Remove all 4 lamps (Figure 9) from the T-Bar by removing the bolts (with washers and nuts) securing each lamp to the T-Bar.

5.Keep the removed lamps and the associated hardware together and store in a safe place, making sure that

the lamps are properly protected to prevent breakage.

page 20 —gb2000 balloon light• operation and parts manual — rev. #3 (08/30/12)

GB2000 specifications

The Multiquip GB2000 is a cutting-edge generator designed to meet the needs of a variety of industries, offering reliable and efficient power solutions. Built with advanced technology and user-friendly features, the GB2000 is tailored for both professionals and contractors who require consistent performance in demanding environments.

One of the standout characteristics of the GB2000 is its robust engine, which is engineered for high efficiency and low emissions. This generator is powered by a high-performance engine that provides a substantial power output, ensuring that it can support a wide range of devices and tools. The emphasis on performance makes it suitable for construction sites, events, and emergency backup applications.

The GB2000 also boasts a compact and durable design, making it easy to transport and store. Its lightweight frame does not compromise on durability, as it is built from high-quality materials that can withstand the rigors of daily use. This portability is enhanced by built-in handles and a well-balanced structure, allowing users to maneuver it effortlessly in various settings.

Another significant feature of the GB2000 is its digital control panel, which provides real-time information about power output, fuel levels, and operational status. This intuitive control interface simplifies operation and enhances user experience, allowing users to monitor their power needs effectively and make quick adjustments as necessary.

In terms of safety, the Multiquip GB2000 incorporates several protective measures. This includes automatic low oil shutdown, circuit breaker protection, and a robust frame that protects the engine from external impacts. These features ensure the longevity of the generator while also providing peace of mind to users in high-demand situations.

Technologically, the GB2000 utilizes an advanced inverter system that delivers clean and stable power, crucial for sensitive electronic devices. This inverter technology not only improves fuel efficiency but also minimizes noise production, making it ideal for use in environments where sound levels are a concern.

Overall, the Multiquip GB2000 combines power, portability, and advanced technology, making it a top contender in the portable generator market. Its user-friendly design, safety features, and robust performance ensure it meets the diverse requirements of modern power users, establishing it as a reliable choice for both everyday and emergency power needs.