Multiquip HS62A manual Reversing the Cutting Arm Procedure

HS62A CUT-OFF SAW — MAINTENANCE

Reversing the Cutting Arm Procedure

NOTE	This assembly procedure permits the operator to reorient the cutting blade closer to a wall, column
	and/or object.
		The Multiquip Side Winder Cut-Off Saw comes with a Tool Kit
		(Figure 16) that assist you with day to day operations.You will
		need these tools for the maintenance of your saw.
		Item Gis a versatile screwdriver/wrench that accommodates
		common bolt/screw and nut head sizes of your saw.
		Item His the wrench necessary to accommodate various allen
		screws.
	Figure 20. Tool Kit
		This position displays the cutting blade on the inside (center)
		cutting position.To reverse the blade position continue with the
		following steps:
		Remove the following items from the Cutting Arm Assembly
		to expose the V-belt:

■ Guard Adjustment Knob

■ Two Cap Screws

■ Cover Guard

Figure 21. Inside Center Cutting Position

Loosen the belt tensioning cam		and remove the three
nuts	.This will take tension off the V-belt, and permit you to
reverse the cutting arm.

Figure 22. Belt Tensioning Cam

HS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (10/20/06) — PAGE 23