HS62A CUT-OFF SAW — RULES FOR SAFE OPERATION
General Safety
■ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate this equipment.
■ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the saw.
■ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw.
■ALWAYS inspect the blade, flanges and shafts for damage before installing the blade.
■ALWAYS use
■ALWAYS use
■ALWAYS use abrasive blades or
■ALWAYS read all safety materials and instructions that accompany any blade used with this saw.
■ALWAYS inspect each blade carefully before using it.If there are any signs of damage or unusual wear, DO NOT USE
THE BLADE.
■ALWAYS verify the blade arbor hole matches the saw's spindle before mounting the blade.
■ALWAYS mount the blade solidly and firmly. Wrench tighten the arbor nut.
■ALWAYS make sure the blade and flanges are clean and free of dirt and debris before mounting the blade on the saw.
■ALWAYS use the correct blade for the type of work being done. Check with blade manufacturer if you do not know if blade is correct for desired application.
■ALWAYS hold the saw with both hands when the engine is running. Use a firm grip with thumbs and fingers encircling the handles.
■ALWAYSkeep all parts of the body away from the
■ALWAYS keep the handles dry, clean and free of oil or fuel.
■ALWAYS carry the saw with the engine stopped and the muffler away from the body.
■ALWAYS instruct bystanders on where to stand while the saw is in operation.
■ALWAYS clear the work area of unnecessary people.
■NEVER allow anyone to stand in front of or behind the blade while the engine is running.
■ALWAYS make sure the blade is not contacting any objects before starting the engine.
■ALWAYS check for buried electrical cables before sawing. If unsure, contact the local utilities.
■ALWAYS have all service and maintenance performed by competent trained service personnel.
■ALWAYS clean the saw after each day’s use.
■ALWAYS have a copy of this manual at the job site.
■ALWAYS stop the engine before servicing, adding fuel and oil.
■ALWAYS service air cleaner frequently to prevent carburetor malfunction.
■ALWAYS keep clear of rotating or moving parts while the saw is in operation.
■ALWAYS maintain this saw in a safe operating condition at all times.
■ALWAYS keep any inexperienced and unauthorized people away from the saw at all times.
■ALWAYS store saw properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
This saw is designed for certain
NOTE applications only. DO NOT use or modify this saw for any application otherthanforwhichitwas designed.
HS62A