HS62 CUT-OFF SAW — SAW ASSEMBLY INSTRUCTIONS
Figure 4. Tool Kit
Figure 5. Cutting Arm
Figure 6. Main Saw Body
Figure 7. Cutting Arm Collapsed
The Multiquip Side Winder
Item Gis a versatile screwdriver/wrench that accommodates common bolt/screw and nut head sizes of your saw.
Item H is the wrench necessary to accommodate various allen screws.
Locate the Cutting Arm and remove it from the box.
Remove the following items from the Cutting Arm Assembly:
■Guard Adjustment Knob
■Two Cap Screws (2)
■Cover Guard
Locate the Main Saw Body and remove it from the box.
Remove the following items from the Main Saw Body:
■Two Security Nuts and Washers
■One Cap Screw
Verify that the cutting arm is in the collapsed position, items will be at the rear of the slots as shown in Figure 7. Walk the belt
item | off the spindle pulley. |
Install the main cutting arm ~ ensure that the
Ensure the main cutting arm is seated all the way on the main saw body, and
removed (items | and | ) and fully tighten. |
PAGE 16 — HS62