HS62 CUT-OFF SAW Rules for Safe Operation

HS62 CUT-OFF SAW — RULES FOR SAFE OPERATION

General Safety

■ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate this equipment.

■ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the saw.

■ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw.

■ALWAYS inspect the blade, flanges and shafts for damage before installing the blade.

■ALWAYS use high-speed, reinforced, abrasive blades - 1/8" (3.17 mm) thick (minimum) or high-speed, diamond blades specifically rated with a maximum operating speed of at least 5,400 RPM on 14" (350 mm) or 6,200 RPM on 12" (300 mm).

■ALWAYS use high-speed reinforced, abrasive blades or high-speed, diamond blades marked with a 1" (25.4 mm) hole for a 1" (25.4 mm) flange, or a 20 mm hole for a 20 mm flange.

■ALWAYS use abrasive blades or high-speed diamond blades marked for use with gasoline-powered, hand-held, portable, abrasive cutting-off saws.

■ALWAYS read all safety materials and instructions that accompany any blade used with this saw.

■ALWAYS inspect each blade carefully before using it.If there are any signs of damage or unusual wear, DO NOT USE

THE BLADE.

■ALWAYS verify the blade arbor hole matches the saw's spindle before mounting the blade.

■ALWAYS mount the blade solidly and firmly. Wrench tighten the arbor nut.

■ALWAYS make sure the blade and flanges are clean and free of dirt and debris before mounting the blade on the saw.

■ALWAYS use the correct blade for the type of work being done. Check with blade manufacturer if you do not know if blade is correct for desired application.

■ALWAYS hold the saw with both hands when the engine is running. Use a firm grip with thumbs and fingers encircling the handles.

■ALWAYSkeep all parts of the body away from the cutting-off blades when the engine is running.

■ALWAYS keep the handles dry, clean and free of oil or fuel.

■ALWAYS carry the saw with the engine stopped and the muffler away from the body.

■ALWAYS instruct bystanders on where to stand while the saw is in operation.

■ALWAYS clear the work area of unnecessary people.

■NEVER allow anyone to stand in front of or behind the blade while the engine is running.

■ALWAYS make sure the blade is not contacting any objects before starting the engine.

■ALWAYS check for buried electrical cables before sawing. If unsure, contact the local utilities.

■ALWAYS have all service and maintenance performed by competent trained service personnel.

■ALWAYS clean the saw after each day’s use.

■ALWAYS have a copy of this manual at the job site.

■ALWAYS stop the engine before servicing, adding fuel and oil.

■ALWAYS service air cleaner frequently to prevent carburetor malfunction.

■ALWAYS keep clear of rotating or moving parts while the saw is in operation.

■ALWAYS maintain this saw in a safe operating condition at all times.

■ALWAYS keep any inexperienced and unauthorized people away from the saw at all times.

■ALWAYS store saw properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

This saw is designed for certain

NOTE applications only. DO NOT use or modify this saw for any application other than for which it was designed.

HS62 CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #5 (09/12/05) — PAGE 9

HS62 specifications

The Multiquip HS62 is a powerful, high-performance concrete pump designed to deliver exceptional results in various construction applications. Known for its durability and efficiency, the HS62 is particularly valued by contractors for its versatility and reliability on job sites.

One of the standout features of the Multiquip HS62 is its robust, heavy-duty construction. Made from high-quality materials, the pump is engineered to withstand the rigors of demanding environments, ensuring longevity and reduced maintenance costs. The frame is designed for stability and ease of transport, making it an ideal choice for both commercial and residential projects.

The HS62 comes equipped with a 62-horsepower engine, providing ample power for demanding pumping tasks. This engine drives a hydraulically-operated system that allows the pump to handle a wide variety of concrete mixes, including high-slump and low-slump materials. With a maximum concrete output of up to 64 cubic yards per hour, the HS62 can efficiently tackle large-scale pouring jobs, reducing the time and labor required.

In addition to its powerful engine, the HS62 features advanced technology that enhances its performance. The intelligent control system allows for precise adjustments to the pumping pressure and flow rate, ensuring optimal performance for different applications. This adaptability leads to a smoother operation and reduced wear on the pump components, which can extend the machine's service life.

Safety is a paramount concern with any construction equipment, and the HS62 incorporates several safety features to protect users and equipment alike. It is equipped with emergency stop buttons and adjustable pressure relief valves, which help prevent accidents during operation. Furthermore, the intuitive design of the control panel allows operators to monitor performance and make real-time adjustments easily.

Another characteristic that sets the Multiquip HS62 apart is its ease of maintenance. The pump's design prioritizes accessibility, allowing for quick inspections and repairs without extensive downtime. This focus on user-friendliness ensures that operators can keep the equipment in top working condition, maximizing productivity on the job site.

Overall, the Multiquip HS62 is a reliable and efficient concrete pump that combines power, advanced technology, and user-friendly design to meet the demands of modern construction projects. Whether it’s for commercial building sites, road work, or large residential pours, the HS62 sets a high standard in the concrete pumping industry, making it a valuable asset for any contractor.