Multiquip MT85HS operation manual General Safety

Page 7

SAFETY INFORMATION

GENERAL SAFETY

CAUTION

„NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations.

„ NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication.

„NEVER operate this equipment under the influence of drugs or alcohol.

„ALWAYS check the equipment for loosened threads or bolts before starting.

„DO NOT use the equipment for any purpose other than its intended purposes or applications.

NOTICE

„This equipment should only be operated by trained and qualified personnel 18 years of age and older.

„Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

„Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

„NEVER use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

„ ALWAYS know the location of the nearest

fire extinguisher.

„ ALWAYS know the location of the nearest

first aid kit.

„ALWAYS know the location of the nearest phone or keep a phone on the job site. Also, know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

RAMMER SAFETY

DANGER

„NEVER operate the equipment in an explosive atmosphere or near combustible materials.An explosion or fire could result causing severe bodily harm or even death.

WARNING

„NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.

„DO NOT use this machine on ground that is harder than the machine can handle, or for driving pilings or tamping rock beds. Furthermore, use of the machine on sloping ground, such as the side of an embankment, may make the machine unstable and can cause an accident. It can also result in premature machine wear due to uneven loads on the machine.

Use the machine with confidence for tamping earth and sand, soil, gravel, and asphalt. DO NOT use the machine for other types of jobs.

CAUTION

„NEVER lubricate components or attempt service on a running machine.

NOTICE

„ALWAYS keep the machine in proper running condition.

„Fix damage to machine and replace any broken parts immediately.

„ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

MT85HS RAMMER — OPERATION AND PARTS MANUAL — REV. #9 (01/16/12) — PAGE 7

Image 7 Contents
Model MT85HS Proposition 65 Warning MT85HS Rammer Operation and Parts Manual REV. #9 01/16/12 MT85HS Rammer Robin EC12HS Engine Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationGeneral Safety Engine Safety Transporting Safety Definition of Tamping Rammer General InformationSpecifications MT-85HS Rammer SpecificationsMT-85HS Rammer ComponentsRammer Gearbox and Spring Cylinder Oil Bath Operation14 MT85HS Rammer Operation and Parts Manual REV. #9 01/16/12 Normal Shutdown Daily MaintenanceFuel and OIL Lines Engine Troubleshooting Symptom Possible Problem Solution TroubleshootingSymptom Possible Problem Solution Explanation of Codes in the Remarks Column Sample Parts ListTo 3 Units To 5 Units Suggested Spare PartsMikasa Nameplate and DecalsDecal Switch on Decal PRE-CLEANERDecal PRE Cleaner Decal Switch ON-OFFCrankcase and Engine Assy Crank Case Connecting RODThrottle Wire BODY/W-CLEANERGuide Cylinder and Foot Assy Piston END Piston PINStop Ring R-15 Piston RODTank and Handle Assy FILTER, Tank Wire CPHandle Roller Fuel Tank30 MT85HS Rammer Operation and Parts Manual REV. #9 01/16/12 GUARD, OIL Hose STRAP, OIL TankWell NUT M5 WASHER, PW M5Robin EC12HS Engine Crankcase Assy Dowel PIN OIL Seal EC13OIL Seal VC Ball Bearing 6205C3Robin EC12HS Engine Crankshaft and Piston Assy Spring Washer Crank Shaft AssySpacer 0.IT Spacer 0.3TRobin EC12HS Engine Governor Assy Governor ROD Wire BracketGovernor Lever Governor ShaftRobin EC12HS Engine MUFFLER/AIR Cleaner Assy Muffler Bracket Gasket AIR CleanerBracket Cleaner Muffler ComplRobin EC12HS Engine Carburetor Assy Spring AdjusterThrottle Valve Pilot JETRobin EC12HS Engine Recoil Starter Assy Spiral Spring Cylinder BaffleLabelengine Name Tapping BoltRobin EC12HS Engine Electric Device Assy Plug Terminal Wire 22 CPFlywheel Compl GROMMET, HighRobin EC12HS Engine Loose Parts Switch Float CP Freight Policy Terms and Condition of Sale PartsMT85HS Rammer Operation and Parts Manual REV. #9 01/16/12 HERE’S HOW to GET Help
Related manuals
Manual 50 pages 61.04 Kb