Bryant operation manual Base Unit Dimensions, 559F180

	STD UNIT		ECONOMIZER		CORNER			CORNER			CORNER			CORNER			DIM A		DIM B		DIM C
UNIT	WEIGHT		WEIGHT			A			B			C			D
	Lb	Kg	Lb	Kg	Lb		Kg	Lb		Kg	Lb		Kg	Lb		Kg	ft-in.	mm	ft-in.	mm	ft-in.	mm
559F180	1550	703	110	50	391		177	365		166	384		174	410		186	3-5	1041	3-6	1067	1-10	559
559F216	1650	748	110	50	399		181	384		174	402		182	439		199	3-4	1016	3-6	1067	1- 8	508

Ð4Ð

POWER EXHAUST/ BAROMETRIC RELIEF (ACCESSORY ONLY)

NOTES:

1.	Refer to print for roof curb accessory dimensions.
2.	Dimensions in ( ) are in millimeters.

3. Center of Gravity.

4.Direction of air¯ow.

5.Ductwork to be attached to accessory roof curb only.

6.Minimum clearance:

·Rear: 7 -0 (2134) for coil removal. This dimension can be reduced to 4 -0 (1219) if conditions permit coil removal from the top.

·Left side: 4 -0 (1219) for proper condenser coil air¯ow.

·Front: 4 -0 (1219) for control box access.

·Right side: 4 -0 (1219) for proper operation of damper and power exhaust if so equipped.

·Top: 6 -0 (1829) to assure proper condenser fan operation.

·Local codes or jurisdiction may prevail.

7.With the exception of clearance for the condenser coil and the damper/power ex- haust as stated in Note #6, a removable fence or barricade requires no clearance.

8.Dimensions are from outside of corner post. Allow 0 -5¤16(8) on each side for top cover drip edge.

Fig. 4 Ð Base Unit Dimensions, 559F180 and 216