60Hz: AC, Rated Frequency 60Hz
V:Voltage (V)
A:Current (A) KVA: Power (KVA)
%: Continuous Loading Rate
IP21S: Case Protection Class. ‘IP’ is the code of International Protection. ‘2’ means preventing user’s finger from touching dangerous parts; preventing solid material with a diameter no less than 12.5mm into the box. ‘1’ means preventing water falling vertically, which is harmless. ‘S’ means waterproof test is conducted while the movable parts are stationary.
4.Welder Specifications
4.1Main Technical Data (See Table 1)
Item |
| MIG 175 |
|
|
|
Input Power | V | 230 (220~240) |
|
|
|
Frequency | Hz | 60 |
|
|
|
Phase No. |
| 1 |
|
|
|
Rated | V | 35 |
|
|
|
Rated Input Current | A | 20 |
|
|
|
Rated Input Capacity | KVA | 2.3 |
|
|
|
Rated Duty Cycle | % | 20 |
|
|
|
Rated Output Current/ Voltage | A/V | 130/20.5 |
|
|
|
Output Current Adjustment Range | A | 22~175 |
|
|
|
Cooling Type |
| |
|
|
|
External Dimension: L x W x H | Inch | 17.3" x 10.2" x 14.4" |
|
|
|
Carton Dimension: L x W x H | Inch | 20.5" x 12.2" x 16.1" |
|
|
|
Weight | Lb. | 49 |
|
|
|
4.2 Structure of Welder |
|
|
The MIG 175 portable wire feed welder case contains all the components of the welder.
The right side has the wire feed assembly, spool hub, gun trigger connections and polarity connections.
The left side houses the electrical components: transformer, reactor, current capacitor, cooling fan, controlling transformer, PCB, heat radiator and the rectifier bridge.
The front panel contains the voltage and wire feed speed (amperage) control knobs, on/off switch, opening for the gun connection, cooling openings, ground cable and gun trigger connections.
The back panel consists of the power cord, cooling opening and gas valve connection interface. (See the Chart below)
8