9. Packing List
Complete Set Specifications for MIG Series (See Table)
* | MIG 175 Portable Wire Feed Welder | 1 unit |
* | Product Certificate | 1 |
* | Warranty Card | 1 |
|
|
|
* | Operator’s Manual | 1 |
|
|
|
* | Regulator | 1 |
* Flux Core and solid wire samples |
| |
|
|
|
* | MIG Gun | 1 |
|
|
|
* | Shielding gas hose | 1 |
|
| |
* Ground Cable and Clamp | 1 | |
|
|
|
* | Extra Contact Tips | 1 |
10. Transport & Storage
* The welder should not be exposed to rain and snow during transportation and storage. Store in a clean dry facility free from corrosive gas, excess dust and high humidity. Temperature range from
* When transporting or storing the welder after use, it is recommended to repack the product as it was received for protection. (Cleaning is required before storage and you must seal the plastic bag in the box for storage.)
11. Quality Guarantee
Users are advised to operate in compliance with the guidelines in this manual. Proper care and use will ensure many years of welding performance. See warranty on back cover.
16