Special safety advice for polishing

General safety advice for electrical power tools

The workpiece must be supported to both sides of the cutting disc and particularly near the cutting disc and at the workpiece edge.

f)Be particularly careful when pocket cutting in existing walls or other areas where you cannot see what you are cut- ting into. The cutting disc plunged into the surface could cut through gas or water pipes, electricity cables or other objects and cause kickback.

Special safety advice for abrading using sandpaper

Do not use over-sized sanding sheets. Follow the manufacturer’s recommen- dations for sanding sheet size. Sanding sheets that project beyond the backing pad could cause injury in addition to jamming, tearing of the sheet or kickback.

Do not use the polishing bonnet if it has any loose parts, in particular the fastening cords. Tuck the fastening cords away or trim them. Loose fastening cords rotat- ing with the attachment could catch your ﬁngers or become trapped in the workpiece.

Special safety advice for working with wire brushes

a)Bear in mind that wire brushes lose pieces of wire during normal use. Do not overload the wires by applying too much pressure. Flying pieces of wire can very easily penetrate thin clothing and / or skin.

b)Use a guard, if recommended, but make sure that the wire brush does not come into contact with the guard. The diameters of disc brushes and cup brushes can increase due to contact pressure and centripetal forces.

12 GB/IE

Safety advice

for angle grinders

DANGER OF ELECTRIC SHOCK! Do not operate the device if the mains lead or mains plug is damaged.

DANGER OF ELECTRIC SHOCK! Do not touch the mains lead if it becomes damaged or cut through while you are using the device. Pull the plug out of the mains socket immediately and have the de- vice repaired by a suitably qualiﬁed person or at your service centre.

DANGER OF ELECTRIC SHOCK! Do not operate the device if it is damp and do not use it in a damp environment. DANGER OF ELECTRIC SHOCK! If you use the device outdoors, always connect it through a residual current device (RCD) with a maximum trip current of 30 mA. If using an extension lead, always use one that is approved for outdoor use.

Do not suspend or carry the device by the mains lead. Always work with the mains lead leading away from the rear of the device. Otherwise the device could be damaged.

Grinding discs must be carefully kept and handled in accordance with the manufacturer’s instructions. Otherwise they could be damaged.

Make sure that abrasive consumables and tools are attached in accordance with the manufacturer’s instructions and advice. Otherwise they could become detached from the device and result in injury and / or damage to property.

Ensure that any spacers supplied and required for the use of certain abrasive consumables and tools are installed. Do not use separate reducing bushes or adapters in order to make grinding discs with a larger bore fit.

When using abrasive consumables and tools with a threaded insert make sure that the tread is long enough for the spindle length. Otherwise the grinding

PWS 125 A1 specifications

The Parkside PWS 125 A1 is a powerful and versatile angle grinder that has garnered attention for its impressive performance and user-friendly design. This tool is ideal for both DIY enthusiasts and professionals, offering a range of features that make it suitable for various grinding, cutting, and polishing tasks.

One of the main features of the Parkside PWS 125 A1 is its robust 1200-watt motor, which provides ample power for tough jobs. With a no-load speed of up to 11,000 RPM, this angle grinder ensures efficient and swift results, allowing users to tackle materials such as metal, stone, and concrete with ease. The 125 mm grinding disc diameter strikes an excellent balance between maneuverability and cutting depth.

Safety is a key consideration in the design of the PWS 125 A1. Equipped with a protective guard that can be easily adjusted without the need for tools, users can ensure their safety while working. The tool also features a soft-start function that reduces the risk of kickback during start-up, providing an added layer of security when working on various projects.

The ergonomic design of the Parkside PWS 125 A1 enhances user comfort, making it easier to handle for extended periods. The anti-vibration handle is designed to absorb vibrations, minimizing fatigue and ensuring stable control during operation. This makes it an excellent choice for users who may require extended periods of grinding or cutting.

The tool supports a variety of attachments, including different types of grinding and cutting discs, making it a versatile addition to any toolkit. This adaptability ensures that users can switch between tasks without investing in multiple tools. Additionally, the easily accessible spindle lock facilitates quick and hassle-free disc changes.

The innovative cooling system of the PWS 125 A1 is designed to prevent overheating during prolonged use, ensuring the longevity of the motor and the overall tool. This system promotes effective airflow, allowing the grinder to perform optimally even in demanding conditions.

Overall, the Parkside PWS 125 A1 stands out as an excellent combination of power, safety, and versatility. With its array of features and thoughtful design, it is a reliable tool for anyone looking to undertake a variety of grinding and cutting tasks, making it a valuable asset for both DIY projects and professional work. Whether for home improvement or industrial applications, this angle grinder delivers performance and reliability, ensuring user satisfaction.