Parkside PWS 125 A1 manual General safety advice for electrical power tools, Personal safety

Page 8

General safety advice for electrical power tools

with a protective earth. Unmodified plugs and matching sockets reduce the risk of elec- tric shock.

b)Avoid touching earthed surfaces such as pipes, radiators, ovens and refrig- erators with any part of your body.

There is an increased risk of electric shock if your body is earthed.

c)Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock.

d)Do not use the mains lead for any purpose for which it was

not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock.

e)When working outdoors with an electrical power tool always use ex- tension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock.

f)Use a residual current device (RCD) for protection if operating the electri- cal power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock.

3. Personal safety

a)Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of

drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury.

b)Wear personal protective equipment and always wear

safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or

8GB/IE

ear protectors, appropriate to the type of elec- trical power tool used and work undertaken, reduces the risk of injury.

c)Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on.

d)Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury.

e)Avoid placing your body in an unnat- ural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances.

f)Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of mov- ing parts. Loose clothing, jewellery or long hair can become trapped in moving parts.

g)If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust.

4.Careful handling and use of electrical power tools

a)Do not overload the device. Always use an electrical power tool that is intended for the task you are under- taking. By using the right electrical power tool for the job you will work more safely and achieve a better result.

b)Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired.

c)Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is

Image 8
Contents Angle Grinder PWS 125 A1 GB / IE Page Page Table of contents Features and equipment IntroductionAngle grinder PWS 125 A1 Proper useWorkplace safety Electrical safetyIncluded items Technical informationCareful handling and use of electrical power tools General safety advice for electrical power toolsPersonal safety Safety advice for all uses Safety advice relating to kickback Special safety advice relating to grinding and disc-cutting Further special safety advice for disc-cuttingSpecial safety advice for abrading using sandpaper Special safety advice for polishingSpecial safety advice for working with wire brushes Safety advice For angle grindersAdvice on use Setting the speed General safety advice for electrical power tools / UseSwitching on and off Use / Use of accessories Changing a discCutting / roughing discs Flap discs for metalAdjusting the disc guard cover Use of accessoriesOther accessories Service Warranty Using the auxiliary handleMaintenance and cleaning Do not dispose of electric tools in the household waste Disposal / Declaration of Conformity / ManufacturerDisposal Inhaltsverzeichnis EinleitungAllgemeine Sicherheitshinweise für Elektrowerkzeuge BedienungEinleitung Winkelschleifer PWS 125 A1Ausstattung Bestimmungsgemäßer GebrauchArbeitsplatz-Sicherheit LieferumfangTechnische Daten Sicherheit von Personen Allgemeine Sicherheitshinweise für ElektrowerkzeugeElektrische Sicherheit Verwendung und Behandlung des Elektrowerkzeugs Sicherheitshinweise für alle AnwendungenRückschlag und entsprechende Sicherheitshinweise Allgemeine Sicherheitshinweise für Elektrowerkzeuge Weitere besondere Sicherheits- hinweise zum Trennschleifen Besondere Sicherheitshinweise zum SandpapierschleifenBesondere Sicherheitshinweise zum Polieren Besondere Sicherheitshinweise zum Arbeiten mit DrahtbürstenGerätespezifische Sicherheitshinweise für Winkelschleifer Arbeitshinweise Schleifwerkzeuge wechseln Ein- und ausschaltenDrehzahl einstellen Bedienung / Zubehör verwenden Fächerschleifscheiben für MetallWeiteres Zubehör Trenn- / SchruppscheibenZubehör verwenden / Wartung und Reinigung Zusatz-Handgriff verwendenSchutzhaube verstellen Wartung und ReinigungService / Garantie / Entsorgung ServiceGarantie EntsorgungKonformitätserklärung / Hersteller Konformitätserklärung HerstellerKompernass Gmbh

PWS 125 A1 specifications

The Parkside PWS 125 A1 is a powerful and versatile angle grinder that has garnered attention for its impressive performance and user-friendly design. This tool is ideal for both DIY enthusiasts and professionals, offering a range of features that make it suitable for various grinding, cutting, and polishing tasks.

One of the main features of the Parkside PWS 125 A1 is its robust 1200-watt motor, which provides ample power for tough jobs. With a no-load speed of up to 11,000 RPM, this angle grinder ensures efficient and swift results, allowing users to tackle materials such as metal, stone, and concrete with ease. The 125 mm grinding disc diameter strikes an excellent balance between maneuverability and cutting depth.

Safety is a key consideration in the design of the PWS 125 A1. Equipped with a protective guard that can be easily adjusted without the need for tools, users can ensure their safety while working. The tool also features a soft-start function that reduces the risk of kickback during start-up, providing an added layer of security when working on various projects.

The ergonomic design of the Parkside PWS 125 A1 enhances user comfort, making it easier to handle for extended periods. The anti-vibration handle is designed to absorb vibrations, minimizing fatigue and ensuring stable control during operation. This makes it an excellent choice for users who may require extended periods of grinding or cutting.

The tool supports a variety of attachments, including different types of grinding and cutting discs, making it a versatile addition to any toolkit. This adaptability ensures that users can switch between tasks without investing in multiple tools. Additionally, the easily accessible spindle lock facilitates quick and hassle-free disc changes.

The innovative cooling system of the PWS 125 A1 is designed to prevent overheating during prolonged use, ensuring the longevity of the motor and the overall tool. This system promotes effective airflow, allowing the grinder to perform optimally even in demanding conditions.

Overall, the Parkside PWS 125 A1 stands out as an excellent combination of power, safety, and versatility. With its array of features and thoughtful design, it is a reliable tool for anyone looking to undertake a variety of grinding and cutting tasks, making it a valuable asset for both DIY projects and professional work. Whether for home improvement or industrial applications, this angle grinder delivers performance and reliability, ensuring user satisfaction.