Parkside PWS 125 A1 Included items, Technical information, Workplace safety, Electrical safety

Page 7

Introduction / General safety advice for electrical power tools

Included items

1 Angle grinder PWS 125 A1

1 Metal-cutting disc

1 Auxiliary handle

1 Disc guard cover

1Spanner

1Operating instructions

Technical information

Rated output:

1200 W

Rated voltage:

230 V~ 50 Hz

Design no-load speed:

n0 3000 - 11000 min-1

Spindle thread:

M14

Protection class:

 

Noise and vibration data:

Measured values for noise are determined in ac- cordance with EN 60745. The A-weighted noise level of the electrical power tool are typically:

Sound pressure level:

91 dB(A)

Sound power level:

102 dB(A)

Uncertainty K:

3 dB

Wear hearing protection!

Vibration total values determined according to EN 60745:

Surface grinding:

Vibration emission value ah = 13.431 m/s2, Uncertainty K = 1.5 m/s2.

WARNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices.

Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical pow- er tool is used regularly in particular circumstances.

Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account

the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working.

General safety advice for electrical power tools

WARNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury.

Keep all the safety advice and instructions in a safe place for future reference!

The term “electrical tool” used in the safety advice refers to electrical tools powered by mains electrici- ty (by means of a mains lead) and electrical tools powered by rechargeable batteries (without a mains lead).

1. Workplace safety

a)Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents.

b)Do not work with the device

in potentially explosive envi- ronments in which there are

inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes.

c)Keep children and other

people away while you are operating the electrical tool.

Distractions can cause you to lose control of the device.

2. Electrical safety

a)The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted

GB/IE

7

Image 7
Contents Angle Grinder PWS 125 A1 GB / IE Page Page Table of contents Proper use Features and equipmentIntroduction Angle grinder PWS 125 A1Technical information Workplace safetyElectrical safety Included itemsPersonal safety General safety advice for electrical power toolsCareful handling and use of electrical power tools Safety advice for all uses Safety advice relating to kickback Further special safety advice for disc-cutting Special safety advice relating to grinding and disc-cuttingSafety advice For angle grinders Special safety advice for abrading using sandpaperSpecial safety advice for polishing Special safety advice for working with wire brushesAdvice on use Switching on and off General safety advice for electrical power tools / UseSetting the speed Flap discs for metal Use / Use of accessoriesChanging a disc Cutting / roughing discsOther accessories Use of accessoriesAdjusting the disc guard cover Maintenance and cleaning Using the auxiliary handleService Warranty Disposal Disposal / Declaration of Conformity / ManufacturerDo not dispose of electric tools in the household waste Bedienung InhaltsverzeichnisEinleitung Allgemeine Sicherheitshinweise für ElektrowerkzeugeBestimmungsgemäßer Gebrauch EinleitungWinkelschleifer PWS 125 A1 AusstattungTechnische Daten LieferumfangArbeitsplatz-Sicherheit Elektrische Sicherheit Allgemeine Sicherheitshinweise für ElektrowerkzeugeSicherheit von Personen Sicherheitshinweise für alle Anwendungen Verwendung und Behandlung des ElektrowerkzeugsRückschlag und entsprechende Sicherheitshinweise Allgemeine Sicherheitshinweise für Elektrowerkzeuge Besondere Sicherheitshinweise zum Arbeiten mit Drahtbürsten Weitere besondere Sicherheits- hinweise zum TrennschleifenBesondere Sicherheitshinweise zum Sandpapierschleifen Besondere Sicherheitshinweise zum PolierenGerätespezifische Sicherheitshinweise für Winkelschleifer Arbeitshinweise Drehzahl einstellen Ein- und ausschaltenSchleifwerkzeuge wechseln Trenn- / Schruppscheiben Bedienung / Zubehör verwendenFächerschleifscheiben für Metall Weiteres ZubehörWartung und Reinigung Zubehör verwenden / Wartung und ReinigungZusatz-Handgriff verwenden Schutzhaube verstellenEntsorgung Service / Garantie / EntsorgungService GarantieKonformitätserklärung Hersteller Konformitätserklärung / HerstellerKompernass Gmbh

PWS 125 A1 specifications

The Parkside PWS 125 A1 is a powerful and versatile angle grinder that has garnered attention for its impressive performance and user-friendly design. This tool is ideal for both DIY enthusiasts and professionals, offering a range of features that make it suitable for various grinding, cutting, and polishing tasks.

One of the main features of the Parkside PWS 125 A1 is its robust 1200-watt motor, which provides ample power for tough jobs. With a no-load speed of up to 11,000 RPM, this angle grinder ensures efficient and swift results, allowing users to tackle materials such as metal, stone, and concrete with ease. The 125 mm grinding disc diameter strikes an excellent balance between maneuverability and cutting depth.

Safety is a key consideration in the design of the PWS 125 A1. Equipped with a protective guard that can be easily adjusted without the need for tools, users can ensure their safety while working. The tool also features a soft-start function that reduces the risk of kickback during start-up, providing an added layer of security when working on various projects.

The ergonomic design of the Parkside PWS 125 A1 enhances user comfort, making it easier to handle for extended periods. The anti-vibration handle is designed to absorb vibrations, minimizing fatigue and ensuring stable control during operation. This makes it an excellent choice for users who may require extended periods of grinding or cutting.

The tool supports a variety of attachments, including different types of grinding and cutting discs, making it a versatile addition to any toolkit. This adaptability ensures that users can switch between tasks without investing in multiple tools. Additionally, the easily accessible spindle lock facilitates quick and hassle-free disc changes.

The innovative cooling system of the PWS 125 A1 is designed to prevent overheating during prolonged use, ensuring the longevity of the motor and the overall tool. This system promotes effective airflow, allowing the grinder to perform optimally even in demanding conditions.

Overall, the Parkside PWS 125 A1 stands out as an excellent combination of power, safety, and versatility. With its array of features and thoughtful design, it is a reliable tool for anyone looking to undertake a variety of grinding and cutting tasks, making it a valuable asset for both DIY projects and professional work. Whether for home improvement or industrial applications, this angle grinder delivers performance and reliability, ensuring user satisfaction.