Grizzly G0717 owner manual Needed for Setup, Unpacking, Description Qty

Page 13

SECTION 3: SETUP

This machine presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and opera- tions before starting the machine!

Wear safety glasses dur- ing the entire setup pro- cess!

This machine and its com- ponents are very heavy. Use power lifting equip- ment such as a fork lift or hoist to move heavy items.

Model G0717 (Mfg. Since 9/10)

Needed for Setup

The following are needed to complete the setup process, but are not included with your machine.

Description

Qty

Safety Glasses

1

Cleaner/Degreaser

As Needed

Disposable Shop Rags

As Needed

Forklift

1

Additional People

1

• Wrenches or Sockets 10, 13mm

1 Ea.

Unpacking

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

SUFFOCATION HAZARD!

Keep children and pets away from plastic bags or packing materials unpacked with this machine. Discard immediately.

-11-

Image 13
Contents Model G0717 Page Table of Contents Manual Accuracy Contact Info IntroductionMachine Description Identification Machine Data Sheet Other Safety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Safety Instructions for Metal Cutting Bandsaws Availability Power SupplyFull-Load Current Rating Circuit InformationExtension Cords Grounding RequirementsMinimum Gauge Size 12 AWG 50 ftNeeded for Setup SetupUnpacking Description QtyItem Figure Qty InventoryBefore cleaning, gather the following CleanupBasic steps for removing rust preventative Site Considerations Lifting & Placing Using Machine MountsMounting Bolting to Concrete FloorsTo assemble your machine AssemblyMounting belt cover Model G0717 Mfg. Since 9/10 Connecting Power Power ConnectionDisconnecting Power Controls Blade on Button Starts the blade Test Run Operation Overview OperationsBlade Terminology Blade SelectionBlade Length ModelTooth Type Tooth SetTo select the correct blade pitch Blade Pitch TPITo change the blade on the bandsaw Blade ChangeTo tension the blade on the bandsaw Blade TensionBlade Breakage Blade TrackingMost common causes of avoidable blade breakage are Downfeed Blade Care Break-InBlade Care Blade Break-InTo change blade speeds Downfeed Pressure Blade SpeedBlade Speed Chart Chip Inspection ChartVise Blade Guide Arms To adjust the rear blade guide armTo rapidly change the vise jaw gap Hazard Cutting FluidTo use the cutting fluid system Cutting Fluid SystemTypical blade brush Blade BrushOperation Tips H9231-Safe Tap Stick, 13 oz AccessoriesH4978 T20446 H4979 Basic Eye ProtectionCleaning MaintenanceSchedule LubricationGear box To change the gear oilTroubleshooting ServiceMotor & Electrical Refer to Feed Rate on Page 29, or Blade Speed Bandsaw OperationsTo replace the V-belt BeltWiring Safety Instructions WiringSee Wiring Overview110 VAC Wiring DiagramElectrical Box 27-1 53-2 66-1 28-1 53-1 72-1 70-1 29-1 52-1 Description Base Parts ListPW06M Flat Washer 12MM PB35M Model BowMotor Mount Plate Saw Bow Parts ListPCAP07M CAP Screw M6-1 X Labels Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty & Returns Order Hours a DAY