Grizzly Model H5698 instruction manual Assembly, Unpacking, Inventory

Page 11

ASSEMBLY

Unpacking

The Model W1713 was carefully packed when it left our warehouse. If you receive it damaged or missing any parts, please contact Woodstock International Service and Support at 1-360-734- 3482 or send e-mail to:tech-support@shopfox.biz.

Inventory

Layout and inventory the package contents list- ed below and familiarize, yourself with the com- ponents shown in Figure 8 to ease assembly.

 

Item

Qty.

1.

Scroll Saw Unit

1

2.

4mm Allen Wrench

1

3.

3mm T-Handle Allen Wrench

1

4.

Saw Blades

2

5.

Blade Guard

1

6.

Blade Adapters

2

Read and understand this entire instruction manual before performing any operations with your machine. Serious personal injury may occur if safety and operational informa- tion is not understood and

followed.

The Model W1713 is a heavy machine at 31 lbs. Use assistance when lifting or moving the machine.

ASSEMBLY

-9-

Image 11
Contents Scroll Saw Page Contents About Your New Scroll Saw Woodstock Service And SupportIntroduction Specifications Warranty And ReturnsStandard Safety Instructions SafetyBe certain the safety glasses you wear meet Injury. Always wear safety glasses or gogGles when operating equipment. Everyday Resistant lenses, they are not safety glassesKnow Your Machine SafetySafety Instructions for Your Scroll Saw Grounding Electrical Requirements110V Operation Extension CordsInventory AssemblyUnpacking Dust Collection Initial CleaningShop Preparation Blade Guard To install the blade guard, do these stepsMounting Scroll Saw Table PrepTo install a pin end blade, do these steps Installing Pin-End BladesTo install a plain end blade, do these steps Installing Pain-End BladesDrop Foot AdjustmentsTo adjust the drop foot, do these steps To adjust the sawdust blower, do these stepsTo calibrate the scale, do these steps To adjust the blade tension, do these stepsScale Calibration Blade TensionTo test run the Model W1713, do these steps OperationsTest Run Blade Selection Table Important issues regarding blade perfor- manceBlade Information Blade SpeedTo perform an interior scroll cutting opera- tion Standard Scroll CuttingInterior Scroll Cutting To perform a standard scroll cutting opera- tionMotor Brushes MaintenanceGeneral Arm BearingsClosure Parts Description Warranty Card BOX BELLINGHAM, WA