OPERATING TIPS AND
MAINTNENACE
Guidelines and Tips
Avoid overloading the saw. Always use sharp saw blades. Do not apply excessive pressure to the saw while using. If the speed drops abnormally, decrease pressure immediately. If the blade stops abruptly or becomes jammed, release the trigger at once.
Ensure the safety of the workplace.
Clear the work area of all parts and debris that may cause injury by flying objects. Securely fix the object to be sawn in a vise or otherwise clamp to avoid injury. Do not attempt to hold workpiece by hand.
Inspect the saw before use. Run the saw before using to ensure all parts are running smoothly and there are no abnormal sounds or sparks. If any defect is found, have unit serviced.
Match your feed rate to the material.
Use a lower rate of feeding the saw through the material when cutting hard materials. In softer material such as drywall or soft woods, you can feed the saw faster.
Know your worksite. Only saw as deep as necessary. Check behind walls for for wires, other electrical hazards, or plumbing.
Maintenance
Keep the saw free from dirt and grease.
Disassembly and improper reassem- bly of this device can result in electri- cal shock danger. Always have this device serviced by an qualified elec- trical repair technician. Serious injury will result.
Operating this equipment has the potential to propel debris into the air which can cause eye injury. Always wear safety glasses or goggles when operating equipment. Be certain the safety glasses you wear meet the appropriate standards of the
American National Standards Institute (ANSI).
Before starting saw, insure the wrench has been removed from the arbor. If not removed, the wrench could be propelled into the air and may cause serious personal injury.
G9906 71⁄4" Circular Saw |