12Additional information

Specifications

Amplifier section

Continuous average power output of 110 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09%** total harmonic distortion (front).

Continuous Power Output

Front. . . . . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Center . . . . . . . . . . . . . . . . . . . 110 W (20 Hz-20 kHz, 0.09%) Surround . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Surround back . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%)

Audio Section

Input (Sensitivity/Impedance)

PHONO MM. . . . . . . . . . . . . . . . . . . . . . . . 4.7 mV/47 kLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .335 mV/47 k

Frequency Response

PHONO MM. . . . . . . . . . . . 20 Hz to 20,000 Hz ± 0.3 dB LINE . . . . . . . . . . . . . . . . . . . . . 5 Hz to 100,000 Hz dB

Output (Level/Impedance)

LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/2.2 kTone Control

BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz) LOUDNESS . . . . . . . . . . . . . +4/+2 dB (100Hz/10 kHz)

(at volume position -40dB)

Signal-to-Noise Ratio (IHF, short circuited, A network) LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 dB

Signal-to-Noise Ratio [EIA, at 1W (1kHz)]

LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 dB

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers

**Measured by Audio Spectrum Analyzer

Stereo Separation . . . . . . . . . . . . . . . . . . . . . . . 40 dB (1 kHz) Frequency Response . . . . . . . . . . . . 30 Hz to 15 kHz ± 1dB Antenna Input . . . . . . . . . . . . . . . . . . . . . . 75 unbalanced

AM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . .530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna) . . . . . . . . . . . . . . . 350 µV/m Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna

Miscellaneous

Power Requirements . . . . . . . . . . . . . . . . . .AC 120 V, 60 Hz Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 W Power Consumption in standby. . . . . . . . . . . . . . . . . . . 0.8W AC outlet (switched) . . . . . . . . . . . . . . . . 100 W (0.8 A) MAX Dimensions . . . . . . . . . . . . 420 (W) 188 (H) 464 (D) mm

(16-9/16 (W) 7-7/16 (H) 18-5/16 (D) in.) Weight (without package) . . . . . . . . . . . . . . 20.3 kg (44.8 lb)

Furnished Parts

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Microphone stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Remote control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Alkaline batteries (AA IEC LR6) . . . . . . . . . . . . . . . . . . . . 4 AM loop antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 These operating instructions . . . . . . . . . . . . . . . . . . . . . . . . 1

Note

Specifications and the design are subject to possible modifications without notice, due to improvements.

Composite Video / S-Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . .1 Vp-p/75 Output (Level/Impedance) . . . . . . . . . . . . . . . . . .1 Vp-p/75 Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . .65 dB Frequency Response . . . . . . . . . . . . . .5 Hz to 10 MHz dB

Component Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . .1 Vp-p/75 Output (Level/Impedance) . . . . . . . . . . . . . . . . . .1 Vp-p/75 Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . .65 dB Frequency Response . . . . . . . . . . . . .5 Hz to 100 MHz dB

FM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . 87.5 MHz to 108 MHz Usable Sensitivity . . . . . Mono: 13.2 dBf, IHF (1.3 µV/75 ) 50 dB Quieting Sensitivity . . . . . . . . . . . . . . .Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio . . . . . . . . . . Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf)

Distortion . . . . . . . . . . . . . . . . . . . . . . . Stereo: 0.5% (1 kHz) Alternate Channel Selectivity . . . . . . . . . . . 60 dB (400 kHz)

98

Maintenance of external surfaces

Use a polishing cloth or dry cloth to wipe off dust and dirt.

When the surfaces are dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleaners.

En

Page 98
Image 98
Pioneer VSX-9300TX manual Additional information Specifications, Maintenance of external surfaces