Glossary of Terms

The following is a list of common definitions, terms and phrases used throughout this manual. Become familiar with these terms for assembling, adjusting or operating this machine. Your safety is VERY important to us at Grizzly!

Arbor: A metal shaft extending from the drive mechanism on which the saw blade is mount- ed.

Bevel Edge Cut: Tilting the arbor and saw blade to an angle between 0° and 45° to cut a bev- eled edge onto a workpiece.

Blade Guard: Metal or plastic safety device that mounts over the saw blade to reduce the risk of the accidental operator contact with the saw blade.

Crosscut: Cutting operation in which the cross- cut fence is used to cut across the shortest width of the workpiece.

Dado Blade: Blade or set of blades that are used to cut grooves and rabbets.

Dado Cut: Cutting operation that uses a dado blade to cut a flat bottomed groove into the face of the workpiece.

Featherboard: Safety device used to keep the workpiece against the rip fence and against the table surface.

Kerf: The cut or gap in the workpiece after the saw blade cuts through it.

Kickback: When the workpiece is propelled back towards the operator at a high rate of speed.

Parallel: Being an equal distance apart at every point along two given lines or planes (i.e. the rip fence face is parallel to the face of the saw blade).

Non-Through Cut: A sawing operation that requires the removal of the blade guard and riving knife. Dado and rabbet cuts are con- sidered Non-Through Cuts because the blade does not protrude above the top face of the wood stock. Deep Non-Through Cuts must be made with multiple, light passes to reduce the risk of kickback. Always remember to re-install the blade guard and riving knife after perform- ing a non-through cut.

Perpendicular: Lines or planes that intersect and form right angles (i.e. the blade is perpen- dicular to the table surface).

Push Stick: Safety device used to push the workpiece through a cutting operation, while keeping the operator's hands away from the blade. Used most often when rip cutting thin workpieces.

Rabbet: Cutting operation that creates an L- shaped channel along the edge of the workpiece.

Riving Knife (Splitter): Metal plate located behind the blade that maintains the kerf open- ing in the wood during a cut.

Straightedge: A tool used to check the flatness, parallelism, or consistency of a surface(s).

Through Cut: A sawing operation in which the workpiece is completely sawn through.

Rip Cut: Cutting operation in which the rip fence is used to cut across the widest width of the workpiece.

G0460/G0461 12" Sliding Table Saw

-11-

G0461, G0460 specifications

The Grizzly G0460 and G0461 are renowned woodworking machines in the arena of jointers and planers, designed specifically to meet the needs of both amateur woodworkers and professional craftsmen. These machines are celebrated for their engineering excellence, offering robust features and advanced technologies that facilitate precision in woodworking projects.

The Grizzly G0460 is a 6-inch jointer that is engineered for efficiency and accuracy, boasting a powerful 1 HP motor. This model is particularly suitable for achieving flat surfaces on wooden boards, with its precision-machined cast iron table providing an exceptionally smooth finish. The G0460's adjustable infeed and outfeed tables ensure optimal alignment, enabling users to handle both narrow and wide stock with ease. The jointer also features a convenient fence system that can be locked at a 90-degree angle or angled up to 45 degrees for bevel cuts, making it a versatile addition to any workshop.

In contrast, the Grizzly G0461 is an 8-inch version of its counterpart, offering increased capacity and capabilities for larger projects. With a similar 1 HP motor, the G0461 allows users to joint wider boards, making it ideal for serious woodworkers who demand higher performance levels. The machine's heavy-duty construction features a cast iron base and table, which not only add stability but also minimize vibrations during operation for enhanced accuracy.

Both models utilize helical cutter heads, which significantly improve the cutting experience. This technology employs multiple small, indexed carbide inserts that provide a smoother cut, reduce noise, and prolong the life of the cutter. The ease of changing the inserts enhances usability, making maintenance less cumbersome for users.

Moreover, safety features such as the blade guard are incorporated into both models, ensuring operator protection. The adjustable depth of cut allows for customized finishes, giving users control over the smoothing process.

In summary, the Grizzly G0460 and G0461 are exceptional tools that combine power, precision, and innovative design. Their capabilities cater to a wide range of woodworking applications, making them reliable choices for anyone serious about crafting fine wood items. Users will appreciate the blend of performance, ease of use, and durability that these machines bring to their woodworking endeavors. Whether tackling small projects or large production runs, the G0460 and G0461 stand as testament to Grizzly's commitment to quality in the woodworking machinery market.