Storage
When storing your air compressor, fol- low these guidelines:
1.Push the compressor ON/OFF lever down to the OFF position.
2.Disconnect the compressor from power.
3.Unplug the compressor.
4.Run the air tool to relieve the air pres- sure in the hose, then remove the air hose and the tool.
5.Drain water from the tank as instructed in Draining Tank on Page 14. Leave the valve open until the next usage.
6.Store the air compressor in its normal operating position in a dry and pro- tected area.
Water will condense in the air com- pressor tank when the compressor is in operation. Water left in the tank can cause the tank to weaken and corrode, increasing the risk of tank rupture.
Always disconnect the air hose from tools whenever not in use or while servicing! During maintenance, a tool connected to air may operate accidentally, causing serious per- sonal injury!
Failure to unplug the air compres- sor before storage may result in the compressor running continuously, causing overheating, damage to the compressor, and possibly a fire.
Model T21888 (Mfg. since 2/10) |