SECTION 1: CIRCUIT
REQUIREMENTS
110V Operation
Serious personal injury could occur if you connect the machine to the power source before you have com- pleted the set up process. DO NOT connect the machine to the power source until instructed to do so.
Electrocution or fire could result if this machine is not ground- ed correctly or if your electrical configura- tion does not comply with local and state codes. Ensure compli- ance by checking with a qualified electrician!
Amperage Draw
The motor on your air compressor will draw the following amps:
Motor Draw | 15 Amps |
Circuit Requirements
The power supply circuit for your machine MUST be grounded and rated for the amperage given below. Never replace a circuit breaker on an existing circuit with one of higher amperage without consulting a qualified electrician to ensure compli- ance with wiring codes. If you are unsure about the wiring codes in your area or you plan to connect your machine to a shared circuit, consult a qualified electrician.
Minimum Circuit Requirement...... 20 Amp
Plug/Receptacle Type
Plug Type...............NEMA | |
Grounding Prong is |
|
Longest of the Three | |
Prongs |
|
Current | Grounded |
Carrying Prongs | |
| Outlet |
Figure 1. Typical type 5-15 plug and
receptacle.
Model T21888 (Mfg. since 2/10) |