3.Connect the completed assembly to the air line by pulling back the outer sleeve of the quick coupler at the end of the air hose and insert the quick change blower assembly. Once inserted, release the outer sleeve of the coupling and make sure the accessory and hose are securely connected.
For instructions on how to assemble the accessories to the outlet side of the quick release blow gun refer to page 12 of this manual.
4. | To discharge the air from | J |
| ||
| the gun, squeeze the trigger |
|
| (Fig. J). The further the |
|
| trigger is squeezed, the |
|
| greater the discharge. |
|
5. | To stop the air discharging, |
|
| release the trigger. |
|
Note. When connecting accessories to the outlet of the quick change blow gun (15) always disconnect it from the hose first. This will allow you more freedom as well as provide for a more easier and safer attachment/detachment of accessories. The dust blow gun is to be used in conjunction with either the tapered inflation fitting (17) or the inflation needle (19).
IMPORTANT. Take extreme care when using the blow gun air tool. The discharge air velocity is VERY high.
•Never point the air gun at anyone.
•Think when you are using the gun. Never allow debris to be blown in the direction of another person, or other objects.
•Use safety glasses, a face or dust mask and appropriate clothing for the task being undertaken.
•Never apply the outlet of the air gun against a person’s body.
•Never look down the air outlet hole of the gun.
Connecting the inflation needle to the quick change blow gun
In order to use the inflation needle you are required to attach the blow gun adaptor (16) to the blow gun (15). Proceed to screw in the inflation needle (19) to the safety nozzle (Fig. K&L).
K |
| L |
|
|
|
IMPORTANT. Take extreme care when using the inflation needle.
•Never point the needle at anyone.
•Use safety glasses, a face or dust mask and appropriate clothing for the task being undertaken.
•Never apply the outlet of the needle against a person’s body.
•Never look down the air outlet hole of the inflation needle
•Always apply lubricant to the needle before inserting and inflating.
•When inserting the needle, insert the open end of the needle into the valve in a slow and safe manner.
Connecting the tapered inflation fitting to the quick change blow gun
In order to use the tapered | M | |
inflation fitting you are required to | ||
| ||
attach the blow gun adapter (16) |
| |
to the blow gun (15). Proceed |
| |
to screw in the tapered inflation |
| |
fitting (17) to the blow gun |
| |
adaptor (16) (Fig. M). |
| |
|
|
12