The following hazards may arise in connection with the tool’s construction and design:
•Damage to the lungs if an effective breathing mask is not worn.
•Damage to hearing if effective earmuffs are not worn.
•Damage to the eyes if effective safety goggles or shield are not worn.
WARNING. In the event that an air line is cut or broken, the air line needs to be immediately disconnected from the compressor at the quick release fitting. This will automatically stop the air from free flowing. A broken air line which is not supported is extremely dangerous and can whip around very quickly, both with the capability of striking people, and blowing foreign particles into the air.
Do not attempt to catch the air line but immediately keep bystanders well clear. Disconnecting the remaining hose from the quick release fitting on the unit will automatically shut off the air supply. Turn off the compressor at the On / Off rocker switch.
Unpacking
Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Components
The MOC6L air compressor is supplied with the following components:
a. Air compressor b. Blow gun
c. Blow gun adaptor
d. Tapered inflation fitting e. Tire chuck
f.Inflation needle
g.Nitto fitted air hose coil
h.1/4” male nitto plugs/adaptors (X2)
i.Roll of teflon tape
8