Grizzly instruction manual H7949/H7950/H7951 Nailer

Page 5

Operating this nailer can propel objects into the air, causing imme- diate eye damage. To protect your- self, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, the intensity of sound made by this nailer at discharge can reach 90 decibels. To protect your hearing, always wear ANSI approved ear protection when operating this nailer.

Read the manual before operation. Become familiar with these nailers, their safety instructions, and opera- tion before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.

Never point this nailer at yourself or another person! Always pay attention to the direction this nailer is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warning may result in serious personal injury.

Nailer accidents routinely happen while moving the gun to another loca- tion, such as up ladders, to another room, or even another job site. Always disconnect the gun immediately after use and never transport the gun while connected to the air—even if the air compressor is disconnected from its power source!

No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results.

H7949/H7950/H7951 Nailer

-3-

Image 5
Contents Model H7949/H7950/H7951 Safety Instructions For Pneumatic Tools SafetyBefore Operating This Equipment Mation about proper operation of the equipmentAlways Wear Ansi Approved Hearing Protection Additional Safety Instructions for Nailers H7949/H7950/H7951 Nailer Model H7950 Specifications Model H7949 SpecificationsIntroduction Foreword Model H7951Model H7949/H7950/H7951 Inventory SetupUnpackingInventory Compressed Air System To verify that the safety nose is working correctly Testing Safety Nose MechanismTo load nails in your nailer OperationsModel H7949/H7950 Loading Nails Model H7951 Loading Nails Rotating Exhaust Cover Unloading NailsTo remove unused nails To rotate the exhaust coverTo operate your nailer Using the NailerTo adjust the nail depth Adjusting DepthClearing Jammed Nails To clear a jammed nail from the dis- charge areaTo replace a piston and O-rings Replacing Pistons/O-RingsCleaningLubricating Cleaning & LubricatingH7949 Parts Breakdown Description H7949 Parts ListPilot Valve H7950 Parts Breakdown H7950 Parts List PH7950094 H7951 Parts Breakdown H7951 Parts List Carbide Chip Symptom Possible Cause Solution TroubleshootingWarranty and Returns Page Warranty Card BOX BELLINGHAM, WA Name Street CityStateZip