INTRODUCTION
Foreword |
| Contact Info |
|
|
|
|
|
|
We are proud to offer the Grizzly Model H6144 34º Angle Finish
The Model H6144 is designed to toenail into corners and shoot at any angle. This nailer is ideal for door, window, exterior, and decorative trim, cabinet work, and fin- ish paneling. The Model H6144 features a 360° exhaust port, comfort grip rubber handle, economical air consumption with low noise, narrow nose for tight spots, and quick jam release mechanism.
The specifications, details, and photo- graphs in this manual represent the Model H6144 as supplied when the manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.
Machine Data
Nail Size | 15 gauge finish nails |
Nail Length | |
Magazine Capacity | 40 Nails |
Air Inlet | ¼" NPT |
Dimension | 2.92" x 10.43" x 16.14" |
Weight | 5¼ lbs. |
Operating Pressure |
H6144 34° Angle Finish
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Read the manual before operation. Become familiar with this nailer, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not under- stood or followed.