Makita AN911H specifications Specification, Standard equipment, Optional accessories

TECHNICAL INFORMATION

Models No.	AN911H
Description	Construction Coil Nailer

CONCEPT AND MAIN APPLICATIONS

PRODUCT

P 1/ 10

L

AN911H is a construction coil nailer powered by high pressure air. Maximum length 90mm (3-1/2inch) wire coil nail can be nailed. Powerful driving make it possible to continuously fasten 28mm thickness hard plywoods and lumber girders with 75mm shank length nails.

Other main advantages are as follows:

Thin and unique shape nose-tip

Magazine designed to make nail loading quick and easy Protective bumpers

H

W

Dimensions: mm (")

Length (L)	293	(11-1/2)
with Hook	125	(4-7/8)
Width (W) without Hook 146 (5-3/4)
Height (H)	319 (12-1/2)

Specification

	Wire coil nails	ø2.5 x 45 ~ ø3.8 x 90
	for wood	(ø0.099 x 1-3/4 ~ ø0.148x 3-1/2)
Nail	Plastic sheet	ø2.5 x 45 ~ ø2.5 x 65
	collated nails
		(ø0.099 x 1-3/4 ~ ø0.099 x 2-1/2)
Shank diameter	for thin steel
x Overall length: Plastic sheet		ø2.5 x 45 ~ ø2.5 x 50
mm(”)	collated nails for	(ø0.099 x 1-3/4 ~ ø0.099 x 2)
	cement board
Magazine type		Open like clamshell
Height control inside Magazine		Four stages
Nail capacity: Quantity		150, 200, 250, 300
Operating air pressure: MPa (psi)		1.28~2.26
		(185 ~ 320)
Change of Wire coil nails
		Auto
and Plastic sheet collated nails
Depth control		Yes
Direction of air exhaust		Forward from front head
Change of bump fire mode and		Yes
sequential mode
Trigger lock-off		No
Hook		Yes
Thickness of Steel plate		3.2mm (1/8")
to be nailed
Protective bumpers		Yes
Soft grip		Yes
Net weight: kg (lbs)		2.3 (5.1)

Standard equipment

Safety goggles .............................. 1

Plastic carrying case ..................... 1

Oil supply ..................................... 1

Nose adapter (flat end type).......... 1

Note: The standard equipment for the tool shown above may vary by country.

Optional accessories

Wire coil nail

ø2.5mm shank ø6mm head conical roll

65mm smooth shank 65mm screw chisel shank ø2.5mm shank ø6mm head flat roll

50mm smooth shank 50mm screw chisel shank

57mm smooth shank 57mm screw chisel shank

65mm smooth shank 65mm screw chisel shank ø2.9mm shank ø7mm head flat roll

50mm screw chisel shank

57mm screw chisel shank

65mm screw chisel shank 71mm screw chisel shank

ø3.1mm shank ø7mm head flat roll

75mm screw chisel shank

85mm screw chisel shank 90mm screw chisel shank

ø3.1mm shank ø7.2mm head flat roll

75mm smooth shank 85mm smooth shank

ø3.1mm shank ø7.5mm head flat roll

90mm smooth shank

JIS compatible (formally called as N in Japan) flat roll

45mm x ø2.5mm shank - ø5.8mm head 50mm x ø2.8mm shank - ø6.6mm head 65mm x ø3.1mm shank - ø7.3mm head 75mm x ø3.4mm shank - ø7.5mm head 90mm x ø3.8mm shank - ø7.9mm head

Conical nail for wood floor

ø2.1mm shank - ø4.2mm head

45mm screw chisel shank 50mm screw chisel shank

Hardened conical nail

ø2.5mm shank - ø5.6mm head

45mm smooth shank	50mm smooth shank
57mm smooth shank	65mm smooth shank

Plastic sheet collated hardened-nail ø2.52mm shank - ø5.5mm head

45mm screw chisel shank 50mm screw chisel shank

Plastic sheet collated hardened-nail ø2.52mm shank - ø5.5mm head

45mm smooth shank 50mm smooth shank 65mm smooth shank