P 4/ 10
Repair
[3]ASSEMBLING/ DISASSEMBLING
[3]-1. Head valve section
DISASSEMBLING
1)Loosen four M6x45 Hex socket head bolts and remove Top cap complete. (Fig. 3)
2)While filling one of two holes of Rear cushion with finger, blow the air into the other hole with air duster. Rear cushion rises and can be removed from Top cap complete. (Fig. 4)
Fig. 3 |
| Fig. 4 |
| M5x16 Hex socket |
|
| head bolt (4pcs.) |
|
| Top cap complete | Two holes |
|
| |
| with Rear cushion |
|
Filter
Compression spring 4
Head valve
Top cap gasket
Rear cushion
Top cap complete
Head valve guide
Housing set
ASSEMBLING | Fig. 5 | ||
| |||
1) | Assemble Rear cushion to Top cap. | Head valve | |
Compression | |||
2) | Put nine Compression springs 4 into holes of Top cap complete. | ||
spring 4 (9pcs.) | |||
3) | Fit Head valve into Top cap complete carefully so as not to lean | ||
| |||
| any Compression springs 4. (Fig. 5) |
| |
|
| Top cap | |
|
| complete | |