Selecting wirelplastic collated coil
According to the type of collated coil, set the change lever.
lever
Wire - collated 111
Loading nailer
CAUTION:
*Always lock the trigger and disconnect the hose before loading the nailer. 
Make sure that nails are collated firmly and are not bent.
Select nails suitable for your work. Pull the lever of the magazine cap and open the magazine cap.
I
. Plastic collated
coil
L | Magazinecap | Lever |
|
Lift and turn the coil support plateto set it to the gradu- ations of the magazine. If the tool is operated with the coil support plate set to the wrong step, poor nail feed or malfunction of the tool may result.
coil support plate
Place the nail coil over the coil support plate. Uncoil enough nails to reach the feed claw. Place the first nail in the driver channel and the second nail in the feed claw. The nail heads must be in the slot in the feeder body. Place other uncoilednails on feeder body and attach them to the magnet. Be sure that nails are in the feeder claw and are not bent. Then close the magazine cap.
Magnet | Feeder body |
12