Makita AN621 instruction manual Shutter

Page 4

Only those involved in the work should be in the vicinity. Children especially must be kept away at all times.

There may be local regulations concerning noise which must be complied with by keeping noise levels within prescribed limits. Incertain cases, shutters should be used to contain noise.

I

Shutter

*Do not play with the contact element: it prevents accidental discharge, so it must be kept on and not removed. Securing the trigger in the ON position is also very dan- gerous. Never attempt to fasten the trigger. Do not operate a tool if any portion of the tool operating controls is inoperable, dis- connected, altered, or not working prop- erly.

Operate the tool within the specified air pressure of 0.44 - 0.83 MPa (65 - 120 PSIG) for safety and longer tool life. Do not exceed the recommended max. operating pressure of 0.83 MPa (120 PSIG). The tool should not be connected to a source whose pressure potentlally exceeds 1.37 MPa(200 PSIG).

-~

Contact element

0.83MPa

0.83MPa

(120 PSIG)

(120 PSIG)

4

Image 4
Contents Construction Coil Nailer Safety Instructions Page Shutter AIR Change lever Page Page Page Page Tool Installation Instructions and US€ Magazinecap Connecting air hose Adjusting depth of nailingOperation Lows Nails Maintenance Maintenance of nailerMaintenance of compressor, air set and air hose Page Makita Limited ONE Year Warranty 11-8, Sumiyoshi-cho Anjo, Aichi 446-8502 Japan