When not in use, lock the trigger and disconnet the hose. Then cap the air fitting with the cap.
When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or a humid or hot environment.
Iron dust that adhereto the magnet can be blown off by using an air duster.
Maintenance of compressor, air set and air hose
After operation, always drain the compressor tank and the air filter. If moisture is allowed to enter the tool. it mav result in Door Derformance and Dossible tool failure.
- 1 | Air litter |
|
17