Emerson 400508-02 installation manual Viii

Page 10

relevant safety legislation in the country of use.

AC supply isolation device

The AC supply must be removed from the drive using an approved isolation device or disconnect before any servicing work is performed, other than adjustments to the settings or parameters specified in the manual. The drive contains capacitors which remain charged to a potentially lethal voltage after the supply has been removed. Allow at least 3 minutes for Epsilon and 30 seconds for E Series drives after removing the supply before carrying out any work which may involve contact with electrical connections to the drive.

Products connected by plug and socket

A special hazard may exist where the drive is incorporated into a product which is connected to the AC supply by a plug and socket. When unplugged, the pins of the plug may be connected to the drive input, which is only separated from the charge stored in the bus capacitor by semiconductor devices. To avoid any possibility of electric shock from the pins, if they are accessible, a means must be provided for automatically disconnecting the plug from the drive (that is, a latching contactor).

Grounding (Earthing, equipotential bonding)

The drive must be grounded by a conductor sufficient to carry all possible fault current in the event of a fault. The ground connections shown in the manual must be followed.

Fuses

Fuses or over-current protection must be provided at the input in accordance with the instructions in the manual.

Isolation of control circuits

The installer must ensure that the external control circuits are isolated from human contact by at least one layer of insulation rated for use at the applied AC supply voltage.

viii

Image 10
Contents FM-3 Programming Module Installation Manual Page FM-3 Programming Module Installation Manual Page Service Support 952995-8033 Customer Service952995-8011 Training Services Or Fax Application Engineering 800893-2321 Sales 952995-8000Document Conventions RepresentsGeneral Warning Safety InstructionsReference Materials Qualified PersonSetup, Commissioning and Maintenance Safety ConsiderationsSafety Precautions Safety of MachineryViii Table of Contents Page Introduction Series EN Drive with FM-3 Function ModuleFM-3 Programming Module Installation Manual Basic Installation Notes InstallationMechanical Installation Modbus Communications Grip the FM On each side LCDPreparing for PowerTools FM-3 Installation Software InstallationPC System Configuration Installing PowerTools FM-3Starting and Exiting PowerTools Starting the SoftwareTo display Help in PowerTools, do one of the following Accessing HelpExiting the Software FM-3 Programming Module Installation Manual Diagnostics and Troubleshooting Diagnostic DisplayFault Codes Diagnostics and Troubleshooting Fault Descriptions High DC Bus Invalid ConfigurationPower Module Low DC BusEncoder Hardware RMS Shunt PowerMax Following Error Motor OvertempFM-3 Specific Fault Descriptions Brake Operation Brake ReleaseAnalog Output Offset units Default Analog Output SourceAnalog Outputs Analog Output Scale unitsDiagnostic Analog Output Test Points Diagnostic Output Test PointsDiagnostic Cable Dgne Diagram Resetting Faults Drive FaultsError Messages Viewing Active Drive FaultsNon-Programming Error Messages Error The maximum limit of Instances is reachedError a FM3 number’s mantissa must be between -2147483647 Programming Error MessagesError Your Application is not valid to download FYI Your Application hasError Couldnt find named Variable from Text Error Can only compare,,etc numeric resultsError Couldnt find named Variable Error Program Instance does not ExistError The destination variable does not accept Data Error Syntax error encounteredError Text Strings are limited to 12 characters Error The destination variable is Read OnlyDiagnostics and Troubleshooting Error This variable cannot be assigned a selection value Error This instance does not existError This is not a fully qualified variable Error This variable type cannot be assigned a valueGlobal Where Am I Button Online Status IndicatorsMotion Status FM-3 Programming Module Installation Manual Specifications Dimensions and Clearances66.0 Cable Diagrams SpecificationsSNCE-XXX Cable SNCDD-001.5 CableSNCO-003 Cable SNCI-003 Cable SNCLI-003 Cable CMDX-XXX Cable CMDO-XXX Cable CDRO-XXX Cable TIA-XXX Cable DDS-XXX Cable TERM-H Head Terminator TERM-T Tail Terminator CMDS-XXX Cable CMMS-XXX Cable CFCS-XXX Cable CFCO-XXX Cable CFOS-XXX Cable Vendor Contact Information Symbols IndexFM-3 Programming Module Installation Manual

400508-02 specifications

The Emerson 400508-02 is a pivotal component in the realm of industrial automation and process control. It is designed to provide precise control and exceptional performance, meeting the demands of various industries, including oil and gas, food and beverage, and pharmaceuticals. This intelligent device is renowned for its reliability, accuracy, and user-friendly features.

One of the main features of the Emerson 400508-02 is its advanced connectivity options. The device is equipped with various communication protocols, such as HART, PROFIBUS, and Modbus, enabling seamless integration into existing systems. This flexibility allows operators to easily monitor and control processes in real-time, enhancing operational efficiency and reducing downtime.

The Emerson 400508-02 utilizes state-of-the-art sensor technologies that offer high accuracy and responsiveness. This results in improved measurement precision and faster response times, which are critical in ensuring optimal process control. The device is designed to handle a wide range of process conditions, making it suitable for diverse applications. Its robust design ensures that it can withstand harsh environments, including extreme temperatures and pressures.

Another notable characteristic of the Emerson 400508-02 is its intuitive user interface. The device typically features a digital display along with straightforward controls, allowing for easy configuration and troubleshooting. This user-friendly design minimizes the learning curve for operators and enhances overall productivity.

Additionally, the Emerson 400508-02 is built with advanced diagnostics capabilities. This system can monitor its own performance and send alerts for potential issues, enabling proactive maintenance strategies. By identifying problems before they lead to breakdowns, facilities can reduce maintenance costs and enhance operational uptime.

Incorporating Emerson’s commitment to sustainability, the 400508-02 is energy-efficient, helping businesses reduce their carbon footprint while maximizing process efficiency. With a focus on digital transformation, this device aligns with industry trends, incorporating IoT technologies that facilitate data collection and analysis for better decision-making.

In conclusion, the Emerson 400508-02 stands out in the industrial automation landscape due to its advanced features, connectivity options, robust design, and user-friendly interface. Its integration of cutting-edge technologies ensures that it meets the challenging demands of modern industrial environments, making it an essential tool for process optimization and efficiency.